GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: mjrodg on August 01, 2008, 10:07:18 AM

Title: Will these handlebars work on my F?
Post by: mjrodg on August 01, 2008, 10:07:18 AM
http://cgi.ebay.com/ebaymotors/Chrome-Motorcycle-Cafe-Clubman-Handlebar-Triumph-Norton_W0QQcmdZViewItemQQcategoryZ35595QQihZ023QQitemZ360075741086QQrdZ1QQsspagenameZWDVW

will these handlebars work on my '04 gs500f?  i want to do something pretty close to this:

http://gstwins.com/gsboard/index.php?topic=42696.0
Title: Re: Will these handlebars work on my F?
Post by: leedutcher on August 01, 2008, 10:09:38 AM
yea... anything 7/8 inch will work  :cheers:
Title: Re: Will these handlebars work on my F?
Post by: The Buddha on August 01, 2008, 10:14:39 AM
That thread link seems to have been done using the same Item ... so it should do what the other one did.
Cool.
Buddha.
Title: Re: Will these handlebars work on my F?
Post by: utgunslinger13 on August 01, 2008, 10:14:55 AM
There was talk about cutting and widening the stock bars to get them to work when you flip them over, but no one mentioned if its been done and how much you need to add between the tabs to widen the bars?

Any ideas?

Thanks,

Nick
Title: Re: Will these handlebars work on my F?
Post by: natedawg120 on August 01, 2008, 10:32:10 AM
they will fit but unless you bend the grip part of the bar with a little curve in it close to the weld you will not be able to lock the steering because the bars will get into the fairings.
Title: Re: Will these handlebars work on my F?
Post by: mjrodg on August 01, 2008, 10:45:53 AM
ok thanks

now, since i have the fairings, do i need some sort of spacers?
Title: Re: Will these handlebars work on my F?
Post by: natedawg120 on August 01, 2008, 10:52:30 AM
Well I had the crome 7/8 like the ones in the link and I had to use something to keep them from slipping around in the clamps, I chose good cork gasket material and that worked like a champ.  There are no adapters to get them on.  They will fit the way you would receive, they just aren't perfect.  I had a buddy with a pipe bender and was able to bend the bar slightly to allow the steering to lock and because in a parking lot when turning slow and tight I didn't want to loose any steering.
Title: Re: Will these handlebars work on my F?
Post by: mach1 on August 01, 2008, 04:49:26 PM
I have the same ones but in black. they work fine as is but if your bike has fairings you will need spacers to raise them a  little. I just got another set of top clamps and put them under the bars to raise them then got longer bolts to clamp them. and they dont hit at full lock for me they have a 1/4 to spare. I have an 04F
Title: Re: Will these handlebars work on my F?
Post by: cstilt on August 01, 2008, 05:48:53 PM
You may want to check these out before you buy the Ebay ones:
http://www.streetbikerider.com/h-bodyparts/bikemaster/pr-bodyparts-handlebars-bikemaster-handlebars-clubman.htm
Looks to be a bit cheaper than the ones you gave the link to. I just ordered a set a couple days go and the total was less than the price on the site because of the 15% off deal going on at the moment.  The shipping is also free.

Chris
Title: Re: Will these handlebars work on my F?
Post by: mjrodg on August 02, 2008, 07:37:56 AM
thanks everyone

cstilt
did you put yours on yet?
Title: Re: Will these handlebars work on my F?
Post by: cstilt on August 02, 2008, 10:12:03 AM
They've not came in the mail yet. I only placed the order 2 days ago.  I ordered the superbike bars though. Didn't want to be quite as agressive as the ones you were wanting. Sorry, thought I said that in the previous post, but I guess I didn't.  I saw those when I was looking for me a set and remembered them when I saw your post.

Chris