Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: drowningbird808 on August 23, 2008, 06:50:49 PM

Title: what jet sizes should i run
Post by: drowningbird808 on August 23, 2008, 06:50:49 PM
bike is a 06 with lunch box. i have a cut down trs yoshi with barely any packing in to its pretty much a straight pipe. the can is about 8 inches long..also how much more effectinve is a after market petcock
Title: Re: what jet sizes should i run
Post by: The Buddha on August 23, 2008, 06:52:41 PM
20/65/147.5 seems to be a starting point with that set up.
Maybe 20 washer, 147.5 ??? dunno no one has tried it.
Cool.
Buddha.
Title: Re: what jet sizes should i run
Post by: drowningbird808 on August 23, 2008, 07:01:04 PM
i know i rejetted it when before i cut the pipe down i need to go look for at teh sizes. what do i do for the mixture screw
Title: Re: what jet sizes should i run
Post by: The Buddha on August 23, 2008, 08:27:26 PM
I guess check faq ... but prolly take off the caps and put it at 3 turns ?
Cool.
Buddha.
Title: Re: what jet sizes should i run
Post by: galahs on August 24, 2008, 01:09:31 AM
I use a 20, 65, 145 without problems

but a 20, 65, 147.5 would also be fine.
Text only | Text with Images