mostly 95 model.
Two frames available. One is useable, but not titled. The other has been chopped up and is probably trash.
95 engine needs a topend rebuild. valves knocking and I could not get it to go away with the shims.
I will post pics later. I have everything for a 95.
Name your price and pay for shipping.
everything has got to go. I just bought a 66 mustang to restore. I need this junk gone.
I am in Daleville, AL 36322.
Make an offer for all of it. I need it gone.
I will post pics later.
How much for the side covers and the plastic piece that goes between them under the grab bar?
Quote from: 3imo on September 18, 2008, 08:35:05 AM
Name your price and pay for shipping.
They are worth $1000.00 to me. How much are they worth to you? :laugh: :cheers:
I will get some pics up today.
How about the tank, front and rear complete brake systems w/ levers, master cylinders, lines, calipers, rotors etc...
If you have guages and a cluster housing in good shape I can give you $50 + shipping
Quote from: scottpA_GS on September 18, 2008, 08:44:58 AM
How about the tank, front and rear complete brake systems w/ levers, master cylinders, lines, calipers, rotors etc...
scottpA_GS: Name a price after you see the pics.
Quote from: halfawake on September 18, 2008, 10:04:40 AM
If you have guages and a cluster housing in good shape I can give you $50 + shipping
Deal. PM sent. check out the pics.
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0073.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0074.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0075.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0076.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0077.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0078.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0079.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0080.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0081.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0082.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0083.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0084.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0085.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0086.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0087.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0088.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0089.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0090.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0091.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0092.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0093.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0094.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0095.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0096.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0097.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0098.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0099.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0100.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0101.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0102.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0103.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0104.jpg)
(http://i47.photobucket.com/albums/f191/eimoytiana/95%20gs500e/IMG_0105.jpg)
Hey man, dash both of them, and headlights ... all of them ... you have 3 I'll take it.
Call a $$. Tank also but if someone buys the whole set, maybe they wont be painting it. I just need tank, not side covers and fender.
Thanks.
Buddha.
Hey there,
Can I buy the riders (front) footpegs from you cheap? I need them for the rubber pegs -- not the mounting brackets that attach to the frame.
Also, can you sell me the left engine (black) cover over the stator?
Also, how about the handlebars? Are they straight?
Give me a price shipped to Zip 17520 in PA?
Thanks, man.
Trwhouse
Hey 3imo - send this man the foot pegs he asking. I dont need to have it in the bunch we discussed.
Trw - I talked to him earlier and bought/committed a bunch of stuff. The foot peg was one of those that was making up the numbers. Its yours ... work it with 3imo. All else as we talked ...
Confused yet ... OK my work is done.
And bars too ... dont care for those either ...
Stator cover - I was hoping to get though ... You know, how about you and 3imo wok a $ for it and he can take it off the $ we discussed ... the rest meee you can have even if I pay for it ... shipping ... that's all you baby.
Cool.
Buddha.
Sorry that aint no stator cover ... the clutch cover the pic has it the same color as the floor, couldn't make it out too well. The stator cover on the motor was not part of what we discussed. So consider the rest as OK from me, stator is between you 2. See confusion ... its a good thing ... now that no one knows who needs what ... we can all move on ...
Cool.
Buddha.
Can any of the two frames be titled or have a title?
ill take the clear headlight (one is the gratted lens the other is clear lens)
its the one on the right in your headlight pics
25 shipped to 24060?
Sorry fellas. Most Items are already spoken for.
Once I figure out whats left I will post a list.
S****h <- Shhhhhh incognito... I had some family issues last night.. I will have all this sorted out for you tonight.
can I get that plastic piece under the grab bar? How much do you want for it?
Hi there 3imo,
So can I get that left riders footpeg from you, under the good graces of buddha, our friend?
I am still searching for one, as well as stock STRAIGHT UNDAMAGED handlebars and a black stator cover that's not scratched.
If you can help with any of these, especially the left rider's footpeg, let me know, and thanks!
Yours,
Trwhouse
P.S. And Buddha, I just want you to know how much I appreciate your help in trying to locate a left rider's footpeg for my bike.
You and I have disagreed on some things before (see Katana front ends for everyone!) :), but I really appreciate your thoughtfulness in being willing to let me have this footpeg from this seller.
You are a good guy and I appreciate it.
Really. :)
Dont worry about it ... foot pegs - I have some I'll send you if somehow 3imo has missed the message - you PM and get a response from him ?
The passenger pegs are the same right ? I ahve some of those for sure ... and without foot peg carriers (which frankieG owes me ... :2guns:) I dont need the passenger pegs do I ... anyway, if 3imo has missed it, I'll yank those off and send you.
Now so many people have disagreed with me on katana FE's I have lost count ... what did we disagree about again ?
I actually never look at who's post it is before replying ... in a way, everyone gets the same answers right or wrong ... Rarely, I'll read the post after I post and usually add to the post.
Cool.
Buddha.
Hi Buddha,
No, the rider pegs and the passenger pegs are different.
The rider pegs are larger and longer.
If you don't have one, I'll keep looking.
And no, I haven't yet heard back from 3imo.
I'll PM him about it now.
Thanks, bub.
Yours,
Trwhouse
:)
OK well, worst case is ... I'll pull them off the thing he sends me ...
But OK 1-2 bikes got no foot pegs, my third one should ... I know I am 1 short, maybe I am more than 1 short, I may be 3 - 1.5 pairs short. Anyway, I'll round some stuff up and send it out ... if 3imo has not sent you.
Bars - I dont believe I am even getting it from him, I dont have a stock one ...
Alternator cover - I may have to con my friend into letting me have his busted up motor ... else I am just right on those.
Cool.
Buddha.
Bump!
3imo, are you out there man? :)
I'd really like to get this left rider's footpeg rubber from you!
Let me know and thanks!
Trwhouse
I PMed u and no response. I need the left side stator cover $15ish + shipping?
Also if you didnt sell the plastics the center piece i need with the two screws (the fairing that covers the top of the brake light) for another $15 with the shipping of the stator cover.
Hi there wildbill,
I actually asked for the left stator cover earlier in this thread but it's apparently gone. :)
Man, why are we having so much trouble finding these parts lately? :)
Yours,
Trwhouse
yeah i pmed him afew days ago about it and no reply. i dont really need it but mine has a small scrape and tiny hole that oil drips out slowly. i guess ill just jb weld it. its only the size of a dime barely anyway.. doesnt even look like it goes all the way through but so with some luck it will work.
I think the stator cover may have gone with the motor.
BTW Trw ... I ahve a friend with a seized motor. I can finnagle it for you ... I'll let you know what he wants for it and how good/bad it is. it was OK AFAIK, but 2 years since we swapped the motor and he put it in his storage, god knows how many times he's dropped it since then.
Cool.
Buddha.
Quote from: Trwhouse on September 20, 2008, 08:35:09 AM
Bump!
3imo, are you out there man? :)
I'd really like to get this left rider's footpeg rubber from you!
Let me know and thanks!
Trwhouse
matbe if you looked harder you would find these
http://cgi.ebay.com/ebaymotors/Suzuki-GS500-GS-500-DRIVER-FOOTPEG-SET_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ10066QQihZ003QQitemZ130244978976QQrdZ1QQsspagenameZWD1V
Yo. Mach,
Did you look at the photos?
First, they look weather rotted and dry. They're from an old bike that was probably stored outside. Did you not look at the photos?
Second, did you not see the rusty, long scrape on one of them in the photo?
I am looking for parts in good condition.
As usual, a smart ass comment from you without any pertinent evaluation.
Pmed a couple of days ago wonderin if you have the parts for sale or not
Hey I apologize for the delay everyone... All I can say is if you were in my shoes you'd understand.
Like I said before most everything is spoken for. Within hours of posting I recieved a phone call and we struck a deal.
TRWhouse I have about 4 pegs and the handle bars for you. I will shoot you a pm.
------------------------------
What is left?
A great set of carbs.
an engine (needs topend rebuild)
two frames (1 chopped up, 1 pristine) bill of sale only
a complete front end (minus tach assy and headlight)
A complete rearend assy.
complete brakes front and rear (front reservior handle has road rash but is functional)
two ea air boxes
front wheel fender(turgouise)
rear grab bar
rear mud guard and cargo strap bars.
When i get a chance I will take more pictures.
crap...
i have a 95 and the same color and could have used a tank.
thats what I get for not checking for 4 days in here :(
Canuk dude, That red is easily powdercoatable. I am finishing up a tank that I undented, will be coating inside and is currently waiting a powdercoat. It will come out looking like new, its almost dent free ... and will be like new when all is done and will stay that way for far longer than paint will. I am thinking I will do it on people's tanks in the near future, $50 to undent, $60 to coat and $10 off if both ... and powder $60-75 depending on their bill.
Cool.
Buddha.
Quote from: The Buddha on September 22, 2008, 12:02:46 PM
Canuk dude, That red is easily powdercoatable.
Red? Red wasn't a color in 95 IIRC.
Oh... NOW the pics decide to work for me... the pics didnt work before and I was hoping that the tank was part of the "most from 95" model.
nevermind...
Quote from: Trwhouse on September 21, 2008, 08:41:59 AM
Yo. Mach,
Did you look at the photos?
First, they look weather rotted and dry. They're from an old bike that was probably stored outside. Did you not look at the photos?
Second, did you not see the rusty, long scrape on one of them in the photo?
I am looking for parts in good condition.
As usual, a smart ass comment from you without any pertinent evaluation.
I heard from my friend - he said he didn't drop the motor, but his engine cover is more than likely not pristene. Pegs and bars 3imo got you ... so I can try to yank this cover off tonight or tommorow night, but how bad can it look ??? If its worse than you like, I'd rather leave the poor guy's motor alone.
Cool.
Buddha.
Quote from: CanukGS500 on September 22, 2008, 12:39:04 PM
Quote from: The Buddha on September 22, 2008, 12:02:46 PM
Canuk dude, That red is easily powdercoatable.
Red? Red wasn't a color in 95 IIRC.
Oh... NOW the pics decide to work for me... the pics didnt work before and I was hoping that the tank was part of the "most from 95" model.
nevermind...
95 I thought had a red. It had the purple and a deep blue ... neither of which I can replicate with any consistency. That 91 red though, my virago's tank is the exact same color, as is a lot of other stuff I powdercoated over the years. maxim body pieces, a savage, atleast 1 gs tank. Many more. Black and that read are things he's hit with alarming regularity. The blue of 01 or 04 or 91 or whatever I get close with the silver under candy blue they do, but its hit or miss and you sometimes end up with a patchy look cos one color runs of top of the other and gets deep in spots and shallow in others.
Cool.
Buddha.
Quote from: The Buddha on September 22, 2008, 12:44:06 PM
95 I thought had a red.
nope :(
http://www.gstwin.com/gs_colors.htm
just Barney Purple or Newport Teal.
And I wont ask him to match either one of them ...
So how about a nice shiny black ... one that looks like its miles deep ... gaze into it and you'll lose yourself till you get rudely awoken as you head hits the concrete cos you got so cross eyed and dizzy ... better than crack ...
Maybe flat black ... looks like black primer ... that ...
Cool.
Buddha.
I'm very interested in the gas tank/matching fenders. I'd take them as a whole set, to convert my bike to red ;)
What's the inside of the tank like?
so...... what is actually for sale now since you say its all spoken for?
Dont know what you have left but if you have a tool kit strap i will take it thanks
Is the engine still available?
Dont mean to interrupt 3imo's sale ...
But if you're close to charlotte NC, I have a motor that you can ride ... and then we pull it and you can take it ... I'd rather it be sold that way ionstead of someone buying it sight unseen. You can be confident it works ...
But if you cant ... just wait and 3imo will respond.
Cool.
Buddha.
Hi again 3imo,
Are you getting anywhere with that left rider's footpeg bub? And you have handlebars, too, that are undamaged?
Thanks,
Trwhouse
PM if you still have the silver top triple clamp cover/thingy for $25 shipped.
:thumb:
how about $25 shipped for the carbs?
how much for the carbs ? call me ( Jay ) 830-534-4288 sprint cell phone
Hi 3imo,
Were you ever able to check out if you have handlebars for me????
I still haven't heard back from you.
Thanks man.
Trwhouse
Trwhouse - footpegs - you got from him ... cos I received one giant heavy box from him and only made my way through 1/4th of it ... but didn't seem to ahve foot pegs in it.
Cool.
Buddha.
do u still have the carberator in woriking condition and if it works for my 1989 gs500e ill give u 70 + shipping for it
Hi Buddha,
I never have heard back from him on the pegs or the bars.
He doesn't respond.
Not sure what's up.
I'm still looking for stock bars in UNDAMAGED condition and a right rider's footpeg now.
Can anyone help?
Thanks,
Trwhouse
Do you have any of the following left?
-Black plastic gauge cups(the thing that encloses the back of the gauges)
-Headlight bucket w/tabs on it
-Ign with keys
-Stator cover
- Tach cable
-Gauge mounting bracket, painted silver preferrably, does not have to have the colored light caps
-clutch lever pivot pin
If you have any, please call me ASAP at (404) 933-7320
Thanks!
Mitch
hi sry if i didnt see it when i read post, but do you have engine mounting bolts and spacers?
thanks