I just completed the F to E conversion and no longer need the fairings. I will post pictures tomorrow, the right side has some very light scuff marks where the PO laid it down I think. Everything is there except for the stock headlight. Some of the plastic plug/bolt things broke when I took the fairing off so you will need those. The fairings are black and silver off an 06.
Make me an offer, possibly trade for integrated tail or something else if you have something cool laying around.
How is a 4 inch rear wheel complete with all the spacers etc you need to toss in the GS's back side. And say a GSXR shock ??? and ???
Cool.
Buddha.
Buddha, first thanks for all of your knowledge and input here, I have learned a lot from reading stuff you have written here, but at the risk of insulting the buddha, it is very hard for me to understand you sometimes, I think you are probably very sarcastic but that is hard to convey on a message board smileys only go so far...
how about some pics of said damage
Quote from: jchc413 on September 20, 2008, 06:33:05 PM
Buddha, first thanks for all of your knowledge and input here, I have learned a lot from reading stuff you have written here, but at the risk of insulting the buddha, it is very hard for me to understand you sometimes, I think you are probably very sarcastic but that is hard to convey on a message board smileys only go so far...
I dont have an integrated tail, but I was asking you if you would trade for some of the items I said ...
You can add more stuff, jet pack, thick fork brace etc ...
So wider rear wheel complete with tire with atleast 50% left, GSXR shock, jet pack, fork brace etc for your fairing, and yea, need pics ... especially of what is included/not.
That headlight frame is vital ... as is the headlight fairing. Just the light ... OK maybe I can buy just that else where.
Cool.
Buddha.
I'm looking for the headlight assembly from an F model to put on my E... If you'd sell that separately I'd buy... of course, Buddha get's first dibs.
Heres some pictures, I have all of the mounting hardware, except for the plastic plugs, and the brackets that I cant take off because they are holding lines onto my frame.
(http://i262.photobucket.com/albums/ii93/jchc413/100_2585_0162.jpg)
scuff mark on headlight fairing
(http://i262.photobucket.com/albums/ii93/jchc413/100_2588_0165.jpg)
right fairing
(http://i262.photobucket.com/albums/ii93/jchc413/100_2586_0163.jpg)
(http://i262.photobucket.com/albums/ii93/jchc413/100_2587_0164.jpg)
No other "damage" that I could find. The marks that are on it could probably be fixed with a new sticker and maybe a little touch up paint if you really wanted to.
Quote from: The Buddha on September 21, 2008, 07:08:01 AM
I dont have an integrated tail, but I was asking you if you would trade for some of the items I said ...
You can add more stuff, jet pack, thick fork brace etc ...
So wider rear wheel complete with tire with atleast 50% left, GSXR shock, jet pack, fork brace etc for your fairing, and yea, need pics ... especially of what is included/not.
That headlight frame is vital ... as is the headlight fairing. Just the light ... OK maybe I can buy just that else where.
Cool.
Buddha.
Youve got a deal if the pics looks good to you. Is the gsxr shock a direct replacement? for the jet kit my bike is an 06 and I have a lunchbox and gsxr-yoshi that are waiting to be installed.
I have the stock mirrors as well, I forgot to take pictures of them earlier, no damage.
Yea good ones on all of em.
Check your PM again.
Cool.
Buddha.
how much for everything?? i have cash
Quote from: chargercalvin on September 21, 2008, 12:11:34 PM
how much for everything?? i have cash
Sorry in the process of being traded to the Buddha.
dang. :mad: ok well i understand first come first serve. if that trade doesnt work out pm me.
I would like that front upper fairing if the deal falls through. Let me know...thanks!
I know that these items are gone already, but I am curious, can something be done to put fairings from a newer model GS onto a pre 00 GS. I guess it would be an E to a F conversion. Its getting cold and it would be nice to get the wind off of my body.
Thanks,
Wayne
Dang... looks like I missed out on what I was looking for.... crap!
Quote from: Cal76 on September 22, 2008, 05:36:22 AM
I know that these items are gone already, but I am curious, can something be done to put fairings from a newer model GS onto a pre 00 GS. I guess it would be an E to a F conversion. Its getting cold and it would be nice to get the wind off of my body.
Thanks,
Wayne
I have done one, and the next one I do will be a 100 times easier, cos I now have a 04 to measure and triangulate stuff with ... however figure atleast $5-700 on top of fairing $$$, brackets alone cost ~100+, the inserts and welding and what not were $250 but its gonna be more if I do now, welder has gotten much busier and $$$ due to inflation, and the tail section bracket carriers I made were 100% hand made, I made a few when I did it and sold a couple ... but figure atleast 50-100 ... I'd skip the tail section if I were you ... but 04 fairing on 89-00 body looks a bit funny.
BTW that bike was owned by tarzanboy a few months before he sold it off list. Ask him how it worked, especially compared to the 05 he just built ...
Cool.
Buddha.
Quote from: wascher24 on September 22, 2008, 08:47:05 AM
Dang... looks like I missed out on what I was looking for.... crap!
http://gstwins.com/gsboard/index.php?topic=44054.0
Check that one out.
Cool.
Buddha.
Yeah, sounds like I will just have to get warmer clothes. :) I really didn't figure it would be cost efficient, but I thought I'd ask because I have seen a few fairing sets here and there.
Thanks,
Wayne
Big appologies to the Buddah but I need the cash, so fairings are for sale 200 plus shipping for everything. I PMed a couple of you.