Okay so a buddy of mine came across a pretty sweet deal of 8 motorcycle alarms that he couldn't pass up. My cut which included a free one and gas to go pick 'em up wasn't so bad either. Anyway, I'm trying to figure it out but there are a few wires that I haven't figured it out yet. I'll post a pic up later for better clarification but for now here goes:
Red......battery
Orange....ACC
Yellow....Signal
Yellow....Signal
Blue.......Starting(?)
Pink.......Flameout wire(to lock)(?)
Gray......Flameout wire(?)
Black.....GND
Now first off; some of the wires don't even correspond because there aren't any yellow wires for the signals but there is a green and a black striped wire which would go right with the wiring of my bike('90 signal wires ). But there isn't a pink or gray for the flameout wires which I have no idea what they are for. Can any of you wiring guys chime in and give me a hand?
Give me a model number and I'll see what I can dig up.
JSE-L688. Chinese crap probably but it was free so If all need is a 12 pack and couple of hours of my time to install I say its worth it. :cheers:
What all did you get? The blue and white wire go to a small 120db speaker. Black is an antenna judging by photo. Heres a pic.
http://upload.ecvv.com/upload/Info/200801/China_I_2006316190902790832_Code_learning_Motorcycle_Alarm.jpg
there's a harness that goes with it that has all the wires that were pictured. Looks like what was on the right shrouded in black.