these are from mine..
who all have done their carb work.. please check and make sure my carbs are sorta like yours. I konw suzuki worked on mine, not sure if they jacked thigns up trying to fix the carb issue.
Location of the mixture screw.. we drilled it out and then use an EZ out on it.
http://officespace.dyndns.org:8080/2001-carb1.jpg
Carb Jets - now which is which?
http://officespace.dyndns.org:8080/2001-carb2.jpg
Same as above but better pic.
http://officespace.dyndns.org:8080/2001-carb3.jpg
now how do i repalce those screws in pic 1 for allen bolts..
Your pics are to big :o
cool
what type of digi cam did you use ... the detail in the pics is really good
8)
Quote from: Cirecool
what type of digi cam did you use ... the detail in the pics is really good
8)
its not my cam, but pkasso's and it think it was a nikon.
Yea, it's a Nikon - Coolpix 3100 set at the highest quality.
I should have reduced the file size before I sent them to you Manjul, I didn't know you were going to post them.
I was going for detail for you to see the jets and stuff.
Manjul, Just take the float bowl screws or one of them to Ace Hardware and match with SS Alen head bolts. They'll set you back a couple three bucks. Well worth it.
Paul
i have my carbs off the bike but i cant open the bottom 8 screws, i tried with the impact screwdriver but maybe i will have to hit it a little harder. the jets in your pics dont look like the ones i bought from suzuki as replacements (137.5, 62.5, 20). who knows what mine really look like inside the bike though. if i mess with the carbs i dont have to resync them do i? cause i have no idea how to do that, but that is my concern with opening it up. thanks all.
i got that same issue..
what is the part #'s you got for your jets..
The suzuki dealer says that the picture on mine are not the stock suzuki jets or whatever.. the stuff that piper5177 said about the jets apparently mine arent the same replacements. so I need part #'s
Yeah, Lex143ms, part numbers would be great if you still have the invoice.