I've got my new rejetted carbs back from buddha and am ready to put them back on the bike. I have the CRF250 petcock and need to cap the vacuum port on the left carb to get it to work. the problem is that I can't seem to locate said vacuum port. I've looked all over the left carb :dunno_white:
can anyone provide a picture of where it is? BTW, I'm pretty sure they are +'01 carbs. here are some pics. is it the circled part in the third pic?
(http://pktdo.com/GS500/carbs1.JPG)
(http://pktdo.com/GS500/carbs2.JPG) (http://pktdo.com/GS500/carbs21.jpg)
Use a T fitting and short the 2 across and the third leg of the T to vacuum fitting. That way carbs also have a vacuum synch and eliminate minor variations of synching. The Buddha may be going blind.
Cool.
Buddha.
can you say that again in english please?? :confused:
Put a T where that hose is and send the third leg of the T intro the petcock vacuum line.
Cool.
Buddha.
I can't as the new CRF250 petcock only has the one output going to the carbs and doesn't have the vacuum line. should I have a problem running the bike with the carbs as they are with a crf petcock?
OK that means the vacuum is fine. Dont touch that. So just fit the fuel line into the GS fuel line.
Cool.
Buddha.