Hey all, i have a bunch of parts laying around and haven't managed to install them. I'm not sure what the going rate is so i'll test waters before actually selling them. Prices are obo, shipping at buyer expense
WILL TRADE/OFFSET COST FOR:
Hella Supertones
sv650 headlight
bar end mirrors
Things that need to go:
Bandit600 rear wheel
Gaugez/bezel
turn signals
commuter case/box
HD Buddha fork brace - powder coated blue
GS front wheel + brake rotor
GS500 Fork with .9 sonic springs
oem shock (trashed)
grab handles (trashed)
airbox (trashed)
oem handlebar (trashed)
GS500 front brake caliper/line/lever
Mirrors
gsxr rear shock with top mounted reservoir, includes lower link and dog bones
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6675.jpg)
$40
2 upper triple handlebar mounts, one ugly silver, the last one is silver but nicer condition than in the pic.
Ugly silver is scratched up and could go for a paint.
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6680.jpg)
$15 + ship
Upper triple fork clamp
$15 + ship
Alpinestars - Exile mesh jacket (Large)
only worn a handful of times last fall, but replaced jacket (a bit tight for me) with leather
(http://www.motorcycle-superstore.com/ProductImages/300/2008_Alpinestars_Exile_Jacket.jpg)
$90 + shipped
89 clipons black with buddha bars
$90 + ship
GS500 Rear wheel, Tire is in good condition, used one season Battlax BT45's. Rims White
$60+shipping
GS lower triple and stem *
$25 shipped
k6/7 GSXR lower triple with stem pressed out*
$20 shipped
*the bits you need for front end conversion without the downtime of ripping yours apart first.
Hi,
I'm interested in the chin fairing. PMing you.
Thanks,
Trwhouse
replied!
nice bike and color; i have the same one ;) (91 blue)
i'll try to get pics in the next couple days. The chin spoiler is boxed up right now ready to ship (so it's kinda a pain spilling out all those foam peanuts again) But everything else is fairly accessible.
just let me know if you are truly interested and i'll snap some
Thanks for the compliments and for the help.
I look forward to seeing the fairing.
And thanks for getting right back to me.
Yours,
Trwhouse
i would like the shock how much shipped to 12065 and how much for the rear wheel shipped and woul dthe cushdrive and stuff fit from the stock rear wheel and how much modding will have to be done and are you looking for stock parts?
I can probably take those turn signals off your hands and maybe the mirrors. I'll send you a pm.
edit:Any chance you know what year and shape of the bike these came off of? Thanks
pics are up!
Add 6 bux for shipping of the shock; i can probably get that out tomorrow if interested
Did you buy stock in a turn-signal company? That's impressive!
previous owner left them for me in the commuter box thingy and never really cracked it open till now.
You never know when you need 8 extra turn signals
Quote from: psyber_0ptix on April 03, 2009, 08:29:34 PM
Hey all, i have a bunch of parts laying around and haven't managed to install them. I'm not sure what the going rate is so i'll test waters before actually selling them. Prices are obo, shipping at buyer expense
Things that need to go:
Dark Gray/Gunmetal (flat in color) Bandit rear wheel with Metzeler MEZ4 tire. no bearings cush or rotor
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6681.jpg)
http://smg.photobucket.com/albums/v283/psyber_0ptix/?action=view¤t=IMG_6684.jpg
$60+ship
That may not be a B4 wheel ??? post the writing and the date stamps.
May be a B6 wheel ... but post up ...
Cool.
Buddha.
Where exactly does this rear case thing mount up?
Psyber dude - How's 10 and shipping for that front fender.
Cool.
Buddha.
Quote from: DrSavant on April 06, 2009, 08:55:42 PM
Where exactly does this rear case thing mount up?
You take the grab handle off and it bolts up to those two holes. It was extra and not installed on the bike when i picked it up. Previous owner threw in a lot of extras as you can see ;p
Buddha -
I'll try to grab the numbers and date stamp later on today or tomorrow. I've got a lot of homework to do!!
The front fender may have been called already; but i'm still debating parting or not. I haven't decided if the bike would look better with or without; or if i sell my bike the next owner would prefer to have it etc...
most of the stuff in this thread is FS, but i still claim testing waters in the title as i may be subject to irrational exuberance. :X
Hey for those who are waiting on quotes for shipping, i deeply apologize. i've been caught up in my school work and have a pretty heavy exam this friday in physics, and have a TON of revisions to do for differential equations tomorrow.
I'll try to get this done by saturday; i appreciate your patience
Physics - niiiiice ... I am upping that offer to $11.25 from the previous 10 ...
What PDE ?
Yea forget that crap, I already got a headache and I aint even touched the 2 boxes that showed up with various nightmares in em.
Not to mention the crimped Fuel line in the virago 1100, and the million things on the GR.
Cool.
Buddha.
yea... Magnetism/amperes and Lenz's laws/ induction/ induced EMS/ flux..... too many derivations to oggle at
I'm correcting all my wrong answers on homework quizes and tests for ordinary diffeq's as an opportunity for extra credit presents itself (if i hand them ALL in tomorrow)
Hey psyber....
I hope your school work has gone well and that you have survived the last few days. You sound like you've been busy! :)
I just wanted to remind you that I sent you a PM a few days ago about the parts we were talking about and I didn't want you to forget about it. :)
Let me know when you have a minute.
Best wishes,
Trwhouse
chin, bars and rear commuter box are spoken for.
Some items i'm still looking for boxes; others should have quotes in PM.
As a forewarning, i didnt anticipate the level of work coming towards finals. All these items will be taken care of (quotes/packaging/shipping) on a weekend basis.
I live in Prov RI if anyone wants to pick up locally. I commute to URI every day, one hour each way, so i often dont make it home in time for the post office to be open. I apologize for all the delays but if you have any questions/comments/concerns/hate, please PM me and i'll give you my contact info.
BUMP
does the gixxer shock fit? and what gixxer is it off of?
the shock should fir HOWEVER, it will require some modification of the battery bracket as the resevoir may interfere. The bottom link may need to be ground as well for clearance or use the link/dog bones it comes with
There was another interest; but i lost it in a bunch of PM's while clearing my inbox.
will trade or offset cost for the following:
gsxr front wheel '06/07
98+ katana rear wheel
I asked for the blue fron fender psyber ...
Cool.
Buddha.
Yo Buddha, my friend,
I had asked about the blue fender first, but psyber still hasn't decided if he wants to sell it.
:)
Your pal,
Trwhouse
Buddha; i'm reluctant to let it go as if i ever sell my bke; maybe the next owner would want it....
but then again i dont have rear plastics either so it will never be complete.
Torn am i, but i'll make a definite decision.....someday
for the time being, BUMP
i would really like to sell some things to pay off some debt/pay bills/ pay tuition
No you did not. Atleast not on the forum.
Quote from: Trwhouse on April 21, 2009, 06:45:07 PM
Yo Buddha, my friend,
I had asked about the blue fender first, but psyber still hasn't decided if he wants to sell it.
:)
Your pal,
Trwhouse
Quote from: The Buddha on April 07, 2009, 05:31:44 AM
Psyber dude - How's 10 and shipping for that front fender.
Cool.
Buddha.
That was Posted on: April 07, 2009, 10:31:44 AM
Cool.
Buddha.
Hi Buddha,
Actually, I had PMd him way earlier and he and I had already discussed the fender.
He wasn't sure, and still isn't if he wants to let it go.
Here's my original PM to him, bub...
____________
Re: Chin fairing
« Sent to: psyber_0ptix on: April 06, 2009, 11:00:27 AM »
Hi again,
OK, so I already said I would like the chin fairing and sent you a note about that this AM.
Well, I looked at your other photos and would also like some other pieces.
Can I also buy the stock handlebars that are in the REAR of your photo? The paint is nicer on them and they look like they are not bent. Would you take $10 for them?
Also, the blue front fender. Is it damaged or cracked in any way? If not, I'd take it as a spare. $15?
You could hopefully ship it altogether in one box? If not, maybe the bars would go in one of those free USPS Priority Mail triangular boxes from the post office. I think that would work.
Best wishes and let me know.
Yours,
Trwhouse
I hope this clarifies things, Buddha. I'd not try to rip you off, my friend. :)
Psyberoptix and I have been talking through PMs from the start.
Best wishes,
Trwhouse
Quote from: The Buddha on April 22, 2009, 11:28:26 AM
No you did not. Atleast not on the forum.
Quote from: Trwhouse on April 21, 2009, 06:45:07 PM
Yo Buddha, my friend,
I had asked about the blue fender first, but psyber still hasn't decided if he wants to sell it.
:)
Your pal,
Trwhouse
Quote from: The Buddha on April 07, 2009, 05:31:44 AM
Psyber dude - How's 10 and shipping for that front fender.
Cool.
Buddha.
That was Posted on: April 07, 2009, 10:31:44 AM
Cool.
Buddha.
bump up; please buy stuff
Bump to you too ... please sell stuff.
Cool.
Buddha.
Its cool you are the 1 ... Now we just need to beat up the Psyber_0ptix and get the parts we need.
Cool.
Buddha.
Quote from: Trwhouse on April 22, 2009, 12:03:30 PM
Hi Buddha,
Actually, I had PMd him way earlier and he and I had already discussed the fender.
He wasn't sure, and still isn't if he wants to let it go.
Here's my original PM to him, bub...
____________
Re: Chin fairing
« Sent to: psyber_0ptix on: April 06, 2009, 11:00:27 AM »
Hi again,
OK, so I already said I would like the chin fairing and sent you a note about that this AM.
Well, I looked at your other photos and would also like some other pieces.
Can I also buy the stock handlebars that are in the REAR of your photo? The paint is nicer on them and they look like they are not bent. Would you take $10 for them?
Also, the blue front fender. Is it damaged or cracked in any way? If not, I'd take it as a spare. $15?
You could hopefully ship it altogether in one box? If not, maybe the bars would go in one of those free USPS Priority Mail triangular boxes from the post office. I think that would work.
Best wishes and let me know.
Yours,
Trwhouse
I hope this clarifies things, Buddha. I'd not try to rip you off, my friend. :)
Psyberoptix and I have been talking through PMs from the start.
Best wishes,
Trwhouse
Quote from: The Buddha on April 22, 2009, 11:28:26 AM
No you did not. Atleast not on the forum.
Quote from: Trwhouse on April 21, 2009, 06:45:07 PM
Yo Buddha, my friend,
I had asked about the blue fender first, but psyber still hasn't decided if he wants to sell it.
:)
Your pal,
Trwhouse
Quote from: The Buddha on April 07, 2009, 05:31:44 AM
Psyber dude - How's 10 and shipping for that front fender.
Cool.
Buddha.
That was Posted on: April 07, 2009, 10:31:44 AM
Cool.
Buddha.
bump
i have an upper triple and another bar mount/plate
chin spoiler and a pair of turn signals gone..
everything else still available
Any revelation on if this fits a GS500 or not?
I am practically local. I totally don't NEED a rear wheel, but want one!
Quote from: The Buddha on April 05, 2009, 06:49:49 PM
Quote from: psyber_0ptix on April 03, 2009, 08:29:34 PM
Hey all, i have a bunch of parts laying around and haven't managed to install them. I'm not sure what the going rate is so i'll test waters before actually selling them. Prices are obo, shipping at buyer expense
Things that need to go:
Dark Gray/Gunmetal (flat in color) Bandit rear wheel with Metzeler MEZ4 tire. no bearings cush or rotor
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6681.jpg)
http://smg.photobucket.com/albums/v283/psyber_0ptix/?action=view¤t=IMG_6684.jpg
$60+ship
That may not be a B4 wheel ??? post the writing and the date stamps.
May be a B6 wheel ... but post up ...
Cool.
Buddha.
the wheel does fit, but you have to make/fab some spacers and modify the caliper bracket. it's not as easy as the katana wheel. theres a writeup :
http://wiki.gstwins.com/index.php?n=Upgrades.RearWheel
updated
Hey there psyber,
The chin fairing and bars arrived today and are gorgeous. Great packing, too!
I love you, man. :)
Thank you, thank you, thank you!
Yours,
trwhouse
P.S. Now, can anyone help with OEM style chin fairing mounts or a suitable replacement for them? I need a set of four. Thanks!
Bars ... bars ... you been looking for that what, 9 months ...
Yea some people just buy bars from I dunno ... a store.
Cool.
Buddha.
bump
updated;
looking for 98+ katana rear rotor + bolts
That rear case thingy can you take a pic of it by the bike so I can get a look at size. or with a helmet, something to gauge by...
will do tomorrow!
I'm interested in the commuter box, I saw on April 20 you said it was spoken for. I see someone else asking for pics now. I want to get in line if the sale falls through.
Thanks
yea i had deleted a bunch of messages to clear up inbox so i don't know who had initially asked for it :(
pics will be up this evening.
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6720.jpg)
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6721.jpg)
(http://img.photobucket.com/albums/v283/psyber_0ptix/IMG_6722.jpg)
it fits a medium helmet (this one is dead/old i dont use btw); i dont have a large to test.... but in any ~case~ i have no where to mount this on my bike since i chopped the rear.
Do you happen to have an IGNITOR?
ignitor?
you have pm.....again
sorry folks, box is now gone. Updated original post. Added alpinestars mesh jacket, and other prospective items for sale soon.
89 clipons
tach/speedo
fork with sonic springs
stock wheels (once i get new tires for my replacements)
stock front brakes
bump; please buy stuff
up again
Heh, so how is it that the box is gone, when last I heard from you was you coming home and sending me the dimensions? That was April 14....
as mentioned in the post at the top of the page, i had inadvertently deleted a bunch of PM's while clearing up space in my box for the most resent inquiries (at the time). therefore i wasn't able to properly track the chain of interest in chronological order. for this i apologize.
lots of things happen when you have a lot on your plate; finals, commuting 2 hours a day everyday to and from school, looking for new apartments and taking a summer class etc etc
forks spoken for; but all other items like clipons, gauges, brakes and rims have price
bump
forks and buddha brace is gone...
bump
Front fork, and front wheel + rotor are gone
bump up
still have clipons available also have spare GS and GSXR triple if you want to do a gsxr fork up front. I can take care of the steering stop, you just have to get the stem pressed and spacer made.
updated
bump
I might be into the clipons. Now that the fiance has a gs500 with risers and lowering links.
I am a foot taller than she is.
:D
it's here if you want em... just let me know when is good for you. :B
Are the clip ons the bent kind for later models? I am looking for straight bars. thanks.
Psyber - I made a 100% reversible boo boo with your wheel bearings (and no I didn't seat both forgetting the spacer in the middle) I seated my bearing seating tool as well as the bearing in one side.
Of course my bearing seating tool was the old bearing ... ergo, its seated on ~1/4 inch of its OD. I gotta get it out by welding a rod to its inner race and knocking it from the other side.
Tommorow I should git'r'done.
Cool.
Buddha.
ok lmk when it's out/ETA. Bike is otherwise done, just waiting for rear tire install!
bump
Is the list on page one current because I may be interested in the front brake set up... Also does it include the master cylinder?
i have everything but the rotor
it's a black lever, master cylinder, line, and caliper/pads/mounting bolts
brakes gone
still have:
89 clipons
gsxr rear shock
mikey mouse mirrors
Some one may have asked all ready but how much are you asking for the GSXR rear shock?
gsxr shock 45 shipped
update: mirrors have been sold
didya sell the stock wheels/tires?
Quote from: intergalactic on July 29, 2009, 11:42:44 AM
didya sell the stock wheels/tires?
front wheel is gone, all i have left is the rear wheel.
it does not have the sprocket drive nor axle as those were retained during the kat wheel swap. rear rotor included but in slightly rough shape (no rotor bolts :( )
If you still have clip on?How much with shipping to 24541?
Quote from: Djcajun on July 29, 2009, 06:41:12 PM
If you still have clip on?How much with shipping to 24541?
100 shiped
I need a front first. Oh well, I guess I will suck it up and do a massive repaint this winter...
Quote from: psyber_0ptix on July 29, 2009, 03:29:41 PM
Quote from: intergalactic on July 29, 2009, 11:42:44 AM
didya sell the stock wheels/tires?
front wheel is gone, all i have left is the rear wheel.
it does not have the sprocket drive nor axle as those were retained during the kat wheel swap. rear rotor included but in slightly rough shape (no rotor bolts :( )
Quote from: intergalactic on July 30, 2009, 06:33:52 AM
I need a front first. Oh well, I guess I will suck it up and do a massive repaint this winter...
intergalactic why massive repaint. I actually painted my rims on the bike. Rather easy if you just take your time.
Because they are heavily corroded and the rest of the bike needs a repaint, too. Tank, plastics, yadda yadda
Quote from: JB848 on July 30, 2009, 08:06:57 AM
Quote from: intergalactic on July 30, 2009, 06:33:52 AM
I need a front first. Oh well, I guess I will suck it up and do a massive repaint this winter...
intergalactic why massive repaint. I actually painted my rims on the bike. Rather easy if you just take your time.
IC not being nosey just trying to help. I thought you were specifically talking about rims only! :thumb:
Robert
hey looking for set of handle bar holder> you got I buy.
black or silver
bump up
bump
bump
updated few prices, throw me reasonable offers.
local preferred, but will ship around my school schedule.