Hi all,
These are SOLD as of today!
Thanks!
Trwhouse
Hey there,
I'm selling a like-new set of SW-Motech handlebar risers in excellent condition. They are silver in color.
They fit all years of GS500s plus a long list of other bikes. They raise the bars up 1 inch, and back by 1 inch for a more comfortable riding position.
Here is the TwistedThrottle.com Web page that lists them (I bought them from them):
http://www.twistedthrottle.com/trade/productview/2016/217/
Here's the description:
Provides a more upright, comfortable riding position by raising and retracting the original 7/8" (22mm) diameter tubular handlebar. No need to replace your handlebars - simply remove the original top clamp, place the riser between the handlebar and original bottom clamp, and install the replacement top clamp using included hardware. Barbacks increase handlebar height by 25mm (1.0") and move them back 25mm (1.0"), producing an overall handlebar displacement of 35.4mm (1.4") at a 45 degree angle from the original position.
They fit my bike perfectly and required only slight re-routing of my clutch cable and front brake hose at the master cylinder.
Here is a list of the bikes they fit according to TwistedThrottle.com:
Confirmed fit list:
Aprilia
Pegaso 650, -'00
BMW
F650CS
F800ST (the fork brake cable stay and cable ties must be temporarily removed during installation for extra slack on this bike) (See the tutorial here!)
F650 Funduro, -'00 (does NOT fit F650GS models)
F650/ST, -'00 (does NOT fit F650GS models)
R80GS/ST ('80-'87)
R100GS/PD
R1100GS
R1150GS (extension of front brake hose required for 30mm riser)
R1150GS Adventure
R1150R
R1150R Rockster
K1100RS, '02-
K100LT
K100RS
K100RT
K75/C
K75RT
K75S
Ducati
Multistrada DS1000 and DS620
Honda
599 (CB600 Hornet, naked model)
919 (CB900 Hornet, naked model)
All Nighthawk models
Kawasaki
Eliminator 125
ER5
ER6F Ninja 650R, '06-
KLX650
KLR650A
Vulcan 750
ZR7
ZR 750 Zephyr
ZRX1200R (control cable extensions may be required)
DOES NOT FIT Z1000 or Z750S!
DOES NOT FIT '08- KLR650!
KTM
LC4 with tubular 7/8" diameter handlebars (measure hole distance before ordering)
MZ
Baghira
Suzuki
DL650 V-Strom, '04- (non-ABS)
DL650 V-Strom, '04- (ABS model requires an upper front brake line extension for installation of barbacks)
DL1000 V-Strom, '02-
DRZ400
DR650SE, '96-
GS500E
GS500F
GSF600 & GSF600/S Bandit, all years
GSF650 & GSF650/S Bandit, all years
GSF1200 & GSF1200/S Bandit, all years
SV650N, -'02 (not for SV650S faired model)
SV650N, '03- (not for SV650S faired model)
SV1000N, '03- (not for SV1000S faired model)
Triumph*
Adventurer 900
Bonneville 800
Legend TT 900
Thunderbird
Tiger 955i, '01-'06
Tiger 900, -'01
Trident 750 & 900
Trophy 900 & 1200
Speed Triple 750, 900, 955i
Speed Triple 1050i, '-07 (note: a rise height of more than 20mm requires a brake extension)
Yamaha
FZ1, -'05 - John Sawyer has confirmed for us that this riser fits without cable modification. Tilt the bars forward when seating the bar in the riser to get some extra slack, then tilt the bars back into driving position. Cable ties may need to be removed during installation.
FZ1, '06-'08
FZ6, '04-
V-Max
I paid $100 plus $11 shipping for them brand new, but I will sell them to you for $75 SHIPPED in the continental USA.
Today they sell for $104.99 plus $11 shipping from TwistedThrottle.com.
I have the original packaging and instructions for them and they are ready to mount to your bike. These are almost brand new!
Let me know and they are yours!
Best wishes,
Trwhouse
I put a set of these on my bike last fall. Any reason you're selling?
(http://i11.photobucket.com/albums/a193/SteveMster/GS500/th_DSCF1049.jpg) (http://s11.photobucket.com/albums/a193/SteveMster/GS500/?action=view¤t=DSCF1049.jpg) (http://i11.photobucket.com/albums/a193/SteveMster/GS500/th_DSCF1050.jpg) (http://s11.photobucket.com/albums/a193/SteveMster/GS500/?action=view¤t=DSCF1050.jpg)
Hi Steve,
Actually, I really liked the riding position with these on, but I also like the stock position.
My girlfriend liked it with these on the bike because she was more comfortable not having to lean forward so much.
But she is gone now ...
So I don't need them anymore. :)
Yours,
Trwhouse
bump!
Bumpeth again... come on, who wants these? :)
Bump again...
It's not my intention to offend you, so please don't get upset by my offer of $30.
Hi there,
Thanks for your offer, but I'd go $60 plus shipping to you in the US.
That's my final offer. :)
They're beautiful and hardly used.
They are a great deal.
Let me know.
Best wishes,
Trwhouse
P.S. I originally typed in that shipping would be included, but that's NOT what I meant! I meant to type in "plus shipping."
Actually, I think I have a buyer now, for $60 plus shipping. I will update as soon as I am positive. Thanks!
TWRhouse, I will give you $60 for the risers delivered! I live in Voluntown Ct 06384. How do you want me to pay? -- JIm :)
Hi all,
These are SOLD now!
Thanks for all the interest. :)
Best wishes,
Trwhouse