Since my valve related problems haven't magically disappeared for some reason.. :dunno_white: :D
(Probably burned intake valve, http://gstwins.com/gsboard/index.php?topic=45781.msg513764#msg513764 (http://gstwins.com/gsboard/index.php?topic=45781.msg513764#msg513764))
I finally decided to remove the head and replace the left intake valve.
My bike has about 22000Km ~ 14000 miles, will the other valves need to be replaced too?
Is it necessary to do a 3 angle job to them, or lapping them is just as good if I don't replace them?
Photo will follow when I finally find a garage to remove the head. :icon_exclaim:
I'm not an expert. But i am poor, so i just lapped mine, and they seem to work fine. Its up to you i guess. I would think at 14000 miles you could still get alot of life out of them.
3 angle them, or better yet replace with kibblewhite stuff. Suzuki intake valves are ... how do I put it ... made of ... what's the material ... yea sheite.
Put new valves all around, put +1 jets in the carbs and watch it work so much better.
Cool.
Buddha.
Well I'm a poor b@stard too, all depends from how much the machine shop will ask for it.
Unfortunately every shop I went to, had valves for enduro and mx, nothing for the poor ol' GS... so I am going OEM. :icon_confused:
100 bucks for a 3 angle.
Cool.
Buddha.