I have a 80-90ish GS500 race bike, looking for sprockets, brake bits, etc.
Post up and let me know what you have. Not you Aaron, I already owe you :)
Bolt on GSXR FE - $400 plus shipping
Modified GS race bike with all of the race parts you could possibly put it on already there. Seriously. Carbon fiber rear brake mount anyone? - $2000
Poker for fun - Bob!
Here are a few of the tid bits I know I have off the top of my head...
Front sprockets:
1 @ 15T (no shoulder) $10
6+ @ 16T (1 is new) (no shoulder except 1 of the used) $10 each
Rear sprockets:
3+ @ 39T $10 each
1 @ 40T $15
2 @ 41T $15 each
Several sprocket carriers $15 each
Rear brake rotors:
1 @ lightened. Too thin for the street. Drilled over size holes. $10
2+ @ stock. $15 each
1 @ Front wheel. Silver. Near perfect. $100.
I may have other stock wheels.
Carbon fiber race tail $100
Fiberglass race tail $75
Carbon Fiber race upper $200
Fiberglass bellypan $25
Keihin CR Special Smooth Bore 34mm carbs $250
RGV VJ-23 swingarm. Has the bushings to fit the GS frame. $150
I have other stuff from my race spares and parts, just need to sort through it all.
I switched alot from GS to more readily available sources. Some are GSXR levers, Kat tachs, Kat front rotors, Kat calipers...
I will be selling off all of my GS parts soon.
Hey dgyver, Do you have performance camshaft and HD springs hanging somewhere in your garage?
I'm interested in your keihin carbs... are they direct bolt on the gs? how does it work for the slides? do I have to buy anything else to complete the installation? What about the jetting?
Thanks a lot
Gab
I have a set of Megacycle cams. One of the exhaust cam lobes is damaged. it needs to be welded and reground, Megacycle can do this but I do not know the cost. Also, one of the bolt holes is broken. The bolt holds but I was going to weld in a stud and use a nut. I had some heavy springs but I believe they are in another head.
$75 + shipping
The Keihin carbs are ready to bolt on a GS. They came off a running GS race bike. Not sure how they are jetted. The slides are mechanical, connected to the throttle cable.
Do you mean the cam sprocket bolt? Can I just put a big welding spot in the hole? What is the cam lift spec? Do you have a pic to show this to my motorcycle machine shop?
For the HD valve springs, If you don't find them, do you think I can order some from megacycle?
Thanks a lot
Yes, for the sprocket bolt. About 1/3 of the material is missing, still holding the bolt.
Part #384-20 with a .417 lift. I have pics at home I can post later.
Springs are available from Megacycle for $35 set.
**edit: corrected part # & lift**
Ok, I am waiting for the pic.
Thanks
I posted the wrong part number & lift previously but corrected it.
Here are links to the pics of the cam damage:
http://img.photobucket.com/albums/v64/dgyver/ForSale/DSCN0861.jpg
http://img.photobucket.com/albums/v64/dgyver/ForSale/DSCN0863.jpg
http://img.photobucket.com/albums/v64/dgyver/ForSale/DSCN0864.jpg
http://img.photobucket.com/albums/v64/dgyver/ForSale/DSCN0865.jpg
http://img.photobucket.com/albums/v64/dgyver/ForSale/DSCN0866.jpg
Thank for the pics, I will show them to the machinist tommorow to get an estimate on how costly it could be. As we never touch to the cam bolts, do you think that I could just weld all together??? it would be very costless.
The sprockets will need to be adjustable.
Hi, I just go to the machine shop and the guy said that maybe they can smooth out the cam surface but it will not be solid as the original and there is nothing to do with the bolt issue so I'll not take them but I am still interested by the carbs. How can we organize for the payment??
Thanks
Gab
No problem about the cams. PM to follow with the carb info.
i got a set of EBC FA296HH i'll sell for 30 shipped