I'm looking for an ignitor assembly for a 1990 GS500E. Does anyone have one for sale? Looks like this
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/31/Year/1990/ModelID/6311/Model/GS500E/GroupID/259172/Group/SIGNAL_GENERATOR (http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/31/Year/1990/ModelID/6311/Model/GS500E/GroupID/259172/Group/SIGNAL_GENERATOR)
I'll bet its not the igniter which is part #1.
Is that what you're trying to buy ?
Cool.
Buddha.
if your talking about part 1, that would be the signal generator.
Part #1 is the ignitor. Got several. $20 + shipping
If you need part #3, the signal generator, got that too. $30 + shipping
my bad, I checked on bikebandit, and they called that the signal generator
I found one on Ebay for a good price. But thanks though!!!
Cool. If ya need any other part let me know, selling off all my stuff.
D man - I could use a wiring harness if you got one as well as that ignitor box.
Why you selling all your stuff ?
I'm thinking, worth a trip to scrape up some cool hot rod parts ?
Like that head you had ... though its a bit extreme for a street only slow poke like me.
Cool.
Buddha.
I know I have a 89 wire harness, a couple of race harnesses, and I should have at least one (maybe 2) 90-02 harnesses.
Are you talking about the ported head?
Just need more room for other projects. Almost finishing putting together my SV, so no need for the GS and parts anymore.
This head had necked valve stems, cut down guides among other things. Yes it was ported and flowed too if I recall. Cams ? it had modded ones ... you got any modded cams otherwise. That could be a single mod I'd do and ride it and turn while as a ghost ...
Street bike ? you think I will break that head by riding it for miles and miles ... on the street, running 87 gas and riding like an old man.
Cool.
Buddha.
Yeah same head.
I have a set of damaged Megacycle cams I would sell for $75. One of the exhaust lobes has some chips in it. They can weld and grind it, not sure what they would charge.
I just realized that I am going to be using that ported head on the 569 motor.
I do have other heads, just not what all I have. There is a milled head but I believe it has a bad valve seat.
Milled - I know some guys who can mill em ... no big deal there. Just the seat broken or valve broken too ?
Cam shaft sounds good ... I may know of people who can weld em ...
I'll let you round up all the stuff you're sure you not gonna be using, I'll come by in a few weeks and scrape em up.
You build that GR motor up ? What are you running on it ? Looking for ideas there, I have to split one to fix the base gaket.
Cool.
Buddha.