Im down to the last part of my bike before i can ride it and i have no clue about how to do it. Im trying to put the black hoses back on to the carbs but I forgot which order i took them off. Im tried kicking the bike because it wouldnt go but all that did was give me a sore foot >:( . Does anyone have any PICTURES of what goes where.....?
I have looked on this site but I cant find anything that covers what im after. BTW: its an 07 GS5000F
Thanks in advance for any help guys
AHA! I knew somebody would use this. I had the same problem and there was nothing on here so I had a friend at a suzuki dealer scan me some junk. Here's the thread
http://gstwins.com/gsboard/index.php?topic=46124.0
Let me know if you need higher resolution pictures because I have much higher resolution pics if you can't figure it out. I guess i could take pics too if you need it .
I learned a good lesson from reading on here, and it paid dividends when I worked on my carbs the other day. I'm a brand newbie on wrenching, so it was valuable advice.
(1) Photograph EVERYTHING before you remove it, unless you're 100% on where it goes
(2) Draw a diagram of routing of hoses or electricals before pulling them.
I'm *not* an artist by any stretch of the imagination, but sketching the frame petcock and the hose routing made things a lot easier during reassembly.
Thanks guys, i think the more i work on the bike the more that goes wrong with it.... Ive got a mate going down to a suzuki place to get some ideas on the bike and to buy a manual (lost mine). Ill sort it out as it comes.
Thanks again :D