Ok, I was planning ahead and gathered all the parts to do a complete top end job on my GS500. I was pretty sure a rebuild was coming in the near future. Thru some luck it doesn't seem to be the case. This engine won't die. If it does blow up I'm not going to fix it...I'll turn it into a coffee table...so...all of my parts are up for sale.
ALL PARTS ARE NEW IN SEALED PACKAGE EXCEPT HEAD, BLOCK AND V&H PISTON. This is pretty much all of the parts required to do a top end on a GS500. All of the new parts were ordered from Bike Bandit for a 1990 but most will fit all years.
THE PART NUMBERS LISTED ARE SUZUKI PART NUMBERS. Bike bandit doesn't give you the genuine suzuki part numbers, but ron ayers does...so if you want to double check that the parts fit your machine use ron ayers.
http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/31/Year/1990/ModelID/6311/Model/GS500E (http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/2/Make/Suzuki/YearID/31/Year/1990/ModelID/6311/Model/GS500E)
Cylinder Head. SOLD
(http://farm4.static.flickr.com/3539/3637604062_076ae51ed5.jpg?v=0)
Carb boot (earlier style carbs) 13101-01D00 with o-ring 09280-40010 new in sealed package. ($11) SOLD PENDING PAYMENT
(http://farm3.static.flickr.com/2401/3637600206_2409ca03ea.jpg?v=0)
These are pretty much all of the gaskets you will need when doing a top end. SOLD
(http://farm4.static.flickr.com/3548/3636786247_0276354434.jpg?v=0)
None of these prices include shipping. If you don't like the prices you must be really cheap!!! :D
izzat 1 carb boot or two for sale for my '92? :)
just one. It comes with an oring already on it. I also have another oring in a sealed package if you wanted to freshen up your other boot.
I'm looking for a head. Could you figure out how much you want for shipping to Ottawa, Ontario? I'll pm you with my postal code.
pmed you back.
Quote from: ineedanap on June 19, 2009, 09:18:22 AM
pmed you back.
PM'd you forth. Or third. Or whatever. :icon_rolleyes:
5thave has dibs on the head for a few days, everything else is still fair game.
If you blew up your stuff I'll give you an extra good deal! :D you know who you are :D
This is too Fncking funny ...
That head ... well used to be owned by the guy who blew up his head gasket ...
Ha ... buddha strikes again ...
Cool.
Buddha.
Thats my old head :whisper:
And the circle continues.................
I love this forum :cheers:
Yeah, I bought the head from ineedanap to use for my Frankenstein experiment. So lopee, which valve is it that's sticking? What do we (that is, you) know is wrong with it that I've got to fix?
Thanks!
ok, can you PM me with total cost for shipping to 03304? USPS is fine.
I am in no rush. I can send you a check or paypal or rolled pennies if you want. :D
Quote from: intergalactic on June 18, 2009, 06:17:05 PM
izzat 1 carb boot or two for sale for my '92? :)
pmed you guys
Quote from: 5thAve on June 29, 2009, 05:48:13 AM
Yeah, I bought the head from ineedanap to use for my Frankenstein experiment. So lopee, which valve is it that's sticking? What do we (that is, you) know is wrong with it that I've got to fix?
Thanks!
5th ave: AFAIK - and he's a local to me so he's stopped by and swapped stories etc - Lopee had a bent valve, not neccesarily sticking. Of all the things he somehow bend it when he was working on it. That actually saved his bacon - it never ran with it bent, he swapped the head with one I rebuilt - I had a valve swap in the works for it but never got to it (what else is new), then I sold the head to ineedanap. You swap that 1 valve, inspect the guides and seat and you're home free.
Your exhaust is on my bike with fresh flat aluminum paint and it has been initial cooked. A final cook will be tommorow on the ride to work and back.
Then it goes off to you with the Kat 750 and the sproket. BTW, the 750 kat shock I said had a broken dial - OK that one is sold, you have a fresh new - nothing broken, not even a cable - which makes it rare as a purple unicorn in the kat shock world, and the sproken from ineedanap - that would be it right ?
See how patience pays - OK not every much, but pay it does.
Cool.
Buddha.
Quote from: 5thAve on June 29, 2009, 05:48:13 AM
Yeah, I bought the head from ineedanap to use for my Frankenstein experiment. So lopee, which valve is it that's sticking? What do we (that is, you) know is wrong with it that I've got to fix?
Thanks!
Bought????
You still have to pay for it. Then you can say that you bought the head.
I got 2nd dibbs on the head if 5th doesn't pay or the deal falls through!
Quote from: ~*STEPH*~ on June 30, 2009, 06:09:43 PM
I got 2nd dibbs on the head if 5th doesn't pay or the deal falls through!
pm'ed you
head sold to steph, carb boot being held for intergalactic, everything else still for sale.
Hey there,
Would you want to sell me the new rubber valve cover gasket without all the other gaskets?
Hey, I'd also take the two exhaust gaskets, too
$20 for all shipped to Zip 17520?
Let me know, and thanks!
Trwhouse :)
Quote from: Trwhouse on July 02, 2009, 08:34:04 PM
Hey there,
Would you want to sell me the new rubber valve cover gasket without all the other gaskets?
Hey, I'd also take the two exhaust gaskets, too
$20 for all shipped to Zip 17520?
Let me know, and thanks!
Trwhouse :)
For $20 I can do better than that. I'll accept your offer and I'll give you a set of 4 new valve cover o-rings for free. :D
Hi there,
You have a deal.
I'll send the money via Paypal tomorrow.
And thanks, man.
I appreciate it.
Best wishes,
Trwhouse :)
Hi again,
OK, I just sent the money to you via Paypal.
Thanks man and have a great holiday weekend!
Yours,
Trwhouse
How much do you want for the head gasket, cylinder gasket, and head gasket o-rings? I was thinking $20 to throw those in w/ the head, if you didn't already ship it. Let me know if you're interested. Thanks!
Quote from: ~*STEPH*~ on July 03, 2009, 07:23:15 PM
How much do you want for the head gasket, cylinder gasket, and head gasket o-rings? I was thinking $20 to throw those in w/ the head, if you didn't already ship it. Let me know if you're interested. Thanks!
Hey, we kind of turned one kit into two. One above the head, one below.
I'll add the breather cover gasket to trwhouse's "$20 kit" to make it fair.
That'll leave you with a "$20 kit" that will include the head gasket, cylinder gasket, head o-rings and the few others that are left. Sound good?
Sounds good to me. Consider the paypal sent! and Thanks again!
For those who paid already, your stuff shipped today. Thanks again.
Got my stuff yesterday and everything was in great shape! This guy ships super fast and communicates quickly with you too! I highly recommend him for anyone looking to purchase any items of his! Thanks again :D
Hi again,
I got the parts today and I had to say THANKS, MAN!
Great, careful packing and shipping.
The parts are all exactly as promised, new and in factory wrapping.
I really appreciate it and wanted you to know it.
Best wishes,
Yours,
Trwhouse :)