Print Page - Turn Signals

Title: Turn Signals
Post by: stuck-to-the-seat on August 22, 2009, 11:33:33 AM

I know nothing about electronics....would i need a resistor fro these?

http://cgi.ebay.ca/2-LED-Motorcycle-Turn-Signals-Suzuki-GS400-GS500_W0QQitemZ370234341436QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item5633afb83c&_trksid=p3286.c0.m14

thanks

Title: Re: Turn Signals
Post by: Toogoofy317 on August 22, 2009, 11:52:38 AM

If those are the only LEDs you are putting on you won't need a load balancer or diode but if you go LED all around then yes.

I'm pretty sure you will need a new resistor to slow down the blinking though! I know you will if you do all four.

Mary

Title: Re: Turn Signals
Post by: stuck-to-the-seat on August 22, 2009, 12:07:27 PM

Thank you very much

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: stuck-to-the-seat on August 22, 2009, 11:33:33 AM