Typically are both fuel air mixture screws supposed to turned out the same on each carb? When I took the brass cap out, one was 1 1/2 turns out and the other was all the way in. I turned both out to 2 3/4 turns out. can they be different? It really doesn't run any better since I turned them out! Kinda funny :dunno_white:
I did this to richen up the mixture assuming like most bikes they come out running lean from the factory.
Thanks!
Carbs come from the factory with a wide range of settings. None of the 4e on my Bandit were anywhere near the same. I made them the same when i rejet though, its common practice.
I would adjust them the same, to the setting that it runs the best at