My engine wouldn't turn over anymore so I popped it apart today. Stripped the cylinder off, and still couldn't figure it out. Finally I pulled up on the passenger side piston and it came off... so I found a bent rod, tore apart piston skirt, screwed up crank, cracked cylinder, broken lower case, damaged balance shaft, and bits of everything scattered throughout. What I REALLY need is a lower end sans gears/trans. It has to roll over cause I really don't wanna put $600+ into an engine that makes 43hp. If someone has a cylinder set for cheap I'd be interested in that too, but I keep finding them for around $50 to my door, so I wasn't gonna ask anyone here to get raped like that. Or if someone knows a cheapish place to get a stroker crank and a resleave for a big bore I'd be interested. Thanks guys.
-JC
(http://www.customfighters.com/forums/imagehosting/84314b92c9bd53c2b.jpg)
I have a 99 gs500e engine with less than 5000 miles if interested feel free to call me at 309 838 4374 or just pm me on here, im asking 450 obo for it