Hello. Where can I find a replacement pin that attaches my footpegs to the brackets on my bike? I mean the pin that feeds through the frame bracket and footpeg, and then fastens with that little flat C-shaped piece of metal. I f@cked up one of my pins trying to replace my footpegs with GSXR rears. Turns out the pin was bent somehow, and wouldn't feed through the holes in either direction, so I had to break it to get it out. I attached my peg with one of the pins from my passenger footpeg, and now I am one short.
Is there a place where I can get another, or should I just take a trip over to Home Depot and buy a nut and bolt to fasten it on?
If you want the real thing you could get one from a dealership or bikebandit I'm sure, but I wouldn't waste the time. Home depot is definitely the way to go. I'm not sure if they have the exact size, but you could grab one of these...
http://www.homedepot.com/Tools-Hardware-Hardware-Fasteners-Fasteners-Pins-Rings-Clips/h_d1/N-5yc1vZ1xiyZaqvo/R-100338693/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
(http://www.homedepot.com/catalog/productImages/400/0f/0fe9a735-f565-49ce-810b-0195339303b3_400.jpg)
and just put a cotter pin through it. If you really wanted to use the eclip like the stock one has, you could get a long one, or a bolt that's long and skinny, and doesn't have threads that start for an inch or two, and take a dremel or something like that and wear the groove in it so the eclip still fits on it. If you're not looking for anything fancy, just get a bolt and a nut. Just make sure you get at least a locking washer, but preferrably one of those nuts with the nylon built in so it doesn't vibrate loose and drop your peg when you're going down the highway.