So I gave my bike a proper washing last weekend. First time in the 7 years I've owned it :oops:
Ridden about 150 miles since then and there is definitely some minor seeping at a few locations along the seam at the valve cover.
The valve cover was last off several years and about 4,500 miles ago when I checked the valve clearance. I do recall using a screwdriver to pop off the cover, which was stuck on as if with glue. This may not have been prudent.
Not sure if I feel like tackling this now, or just wait until I have some other reason to get in there. In either case, any tips on what I could do to stop this leaking?
jeff
put black rtv silicone on the gasket.