Heya! I've been away from the GS scene for a while after crashing my bike the day before I moved away for school. Another degree later, I'm back to part it out.
(http://lh3.ggpht.com/_w_xDVb98Cfo/TDO5w1C0oHI/AAAAAAAAGwc/KciMghd5z9k/s400/P1010668%20%28Large%29.JPG)(http://lh4.ggpht.com/_w_xDVb98Cfo/TDO54tS-3bI/AAAAAAAAGwg/puCj2_-32vA/s400/P1010671%20%28Large%29.JPG)(http://lh5.ggpht.com/_w_xDVb98Cfo/TDO5_4cuN_I/AAAAAAAAGwk/CrOpkKjjFco/s400/P1010680%20%28Large%29.JPG)(http://lh3.ggpht.com/_w_xDVb98Cfo/TDO6SWDOR9I/AAAAAAAAGwo/W8iQnwWSVV0/s400/P1010692%20%28Large%29.JPG)
Damage is primarily in the front end and the left side. The bike is located near Vancouver (in Langley), BC, Canada, in my parents garage, so shipping and picture taking will be on a half-week cycle - since I only have access to the bike Friday ~ Monday.
I'm terrible at setting prices, so just post or PM me with the parts you need and an offer.
***
Sold Items
Top Plate and Bars (i.e. the clip-ons)
Carburetors
Signal Rotor
Pulse Generator Assembly
Forks
Front brake assembly (including the cable holders)
Back brake assembly, caliper holder, and brake torque arm (including right foot peg assembly)
Front and rear axle and chain tension adjuster
Cush drive
Tank
Headlight brackets and dash indicator covers
Tach cable, choke cable, and signal generator cover
Gas tank cap
Engine intake boots
Centre tail piece + body work mounting rubber mushrooms
Pulse generator cover
Right heel guard
Tachometer
Pending...
I'll take the clip ons and top triple clamp.
sorry .. did`t see it was sold ..
Just an FYI, bought parts last week and got them yesterday as described.
How much for the motor? How many miles on it?
I would also be interested in the motor if slimkim doesnt take it
Any update on that motor?
I'm very interested in the seat if it does not have any tears and it is in good shape. Send me a PM with price and shipping to 98064.
Motor is available (without the pulse generator or the signal rotor, which had been sold) with 48,740 km (30,285 miles). Keep in mind shipping will be expensive :icon_eek:. PM me an offer and a location so I can estimate the shipping for you.
WOAH! Mileage is beyond my comfort level. Not to say that its not in great condition, but I'm looking for something around 10. The only reason I'm posting this here and not PMing is so the other guy can see I've given up my spot if he wants to buy it. Good luck parting it out, its a shame to see 'er go!
I'm Interested in a starter motor.
batglider
I'm in Seattle. If you still have your tank and it is in usable shape, I'd love to make a deal and come pick it up. Can you contact me please via email? squire (at) non fiction photo dhot com (take out the spaces and change the at and dhot to their respective symbols, naturally).
Or call 206.407.6470. Thanks!
Scott
bbbump.
I'm in seattle, too! Want the tank, too. Maybe we can share the tank? (Oh, West Seattle. Have to get out my visa to cross the WS bridge)
what about the right side cover and emblem? It would still fit an '09 F model right?
@ragecage23 The colors for the right side cover and emblem are different from the 98-01 models and i believe your 09 is grey/silver, so it probably wont work
oops i meant the engine cover. not the fairing.
Don't need the tank. Still would be fun to ride around Alki with other GS500 owners in Seattle.
Found a brand new in the box tank - in Germany! With shipping, maybe expensive, but it is new, unused, obviously zero rust, and don't have to paint it. So I think it was the right thing to do. Also found matching headlight cowling and tail plastic covers. So my bike will now be red - but it will look brand new and factory original. Working on another tank and if I get it, my present tank will go for sale. Its the black one in my photos.
Are you still parting this out? Could I get your two Headlight brackets? Also i have strange request. I need the little green and blue plastic covers for the turn signal and highbeam lights. So maybe you could pop those off? Let me know.
Tom
Happy October! Will trade bits for a DRZ400S speedo drive.
I see that the clip-ons were inquired about, but are not listed as sold. if they are still available, i'll take them
Are the hand controls and levers still available?
Quote from: TheDrunknmonky on October 09, 2010, 08:49:52 AM
I see that the clip-ons were inquired about, but are not listed as sold. if they are still available, i'll take them
The clip-ons are sold. Sorry.
QuoteAre the hand controls and levers still available?
Only the clutch side is available, the clutch lever has a bit of rash on the ball. (Unless you are talking about the control pods, in which case both are available :)
orderd a couple of parts...
great part great price.
Thanks dude! bike will on the road today for sure.
I'm interested in the right side engine casing, where the pulse generator is. Are you selling this or the engine as a whole?
Quote from: rock_rebel on October 10, 2010, 10:41:43 AM
I'm interested in the right side engine casing, where the pulse generator is. Are you selling this or the engine as a whole?
The cover for the pulse generator is gone, sorry.
Received the parts. Very smooth transaction. Thank you!
Also parting out the engine.
Happy Holidays!
Do you still have the fuel lines and vacuum line off the petcock? i would be interested in them. Send me a PM with the price plus shipping to 75949. Thanks :icon_mrgreen:
also i need the left hand side grip! thanks
hi there, how much for choke cable/lever and tachometer cable? Shipped to USA Zip 02339
Thank you
Only the clutch side is available, the clutch lever has a bit of rash on the ball. (Unless you are talking about the control pods, in which case both are available :)
[/quote]
How much for a throttle tube, left and right controls, or "pods?" Shipped to 89117
Whats Left?
Quote from: whttnbrg on January 15, 2011, 09:14:55 PM
Whats Left?
I think the 1st post has a pretty good list of what's gone - so whatever is unsold is available (picture of what's broken :cry:). CDI, throttle cable, and control pods are currently pending, but otherwise, everything is in a box or on the shelf somewhere...
I'm fairly busy preparing for my phd qualifier/comprehensive exam right now so response will be a bit slower than usual.
I am interested in the wheels if you still have them, also all the foot pegs, back handle, and all the plastic. I can paint it.
Boink.
(https://lh5.googleusercontent.com/_w_xDVb98Cfo/TLJqp29jLjI/AAAAAAAAG5Q/wmCIg6Yz6mo/s640/PA100080.JPG)
(https://lh5.googleusercontent.com/_w_xDVb98Cfo/TRvNNGf5xGI/AAAAAAAAG94/Xqo6bJW10hU/s640/SDC10014.JPG)
I'm interested in the engine/trans... How much..??
I'm in Winnipeg.