I got an 06 500f. I am looking for the left side engine cover, center tail section, rear left foot peg, tail light lense, left side mirror, and a set of clip on handle bars. If anybody has anything just let me know.
I've got:
* foot pegs left and right and brackets (if you need them)
* factory European clip-ons. 1 set left right now that fits the larger tank of an '06: top plate, clips and bars. You can use your bar ends or any bar ends but they use a shorter screw rather than the expanding rubber bushing. See my posts for pix of the factory European bars. Easy to install: replace top plate and move your controls. 10 minutes. (Have a couple sets that fit the older bikes)
* Bar ends but I think only 1 of the shorter screw for the factory clip-ons. Clip-ons use a shorter screw than with the rubber bushing. Bar ends are the same otherwise.
tail light lens: maybe now is the time to put on a Clear Alternatives LED tail light.
Center tail piece: they show up on ebay quite often.
Engine cover: no. Just clutch cover and in black (the left side back cover, not the front one).
wait you have the right side engine cover?
No right side cover. I did have one until Saturday when it went to centuryghost.
Just left side clutch cover (the back part of the 2 covers on the left side). I think the right side and the left-front cover are hard to find because they get take a major hit in a crash AND they hold in the oil, so they have to stay with the engine. The left back clutch cover rarely gets damaged because the front left cover takes the hit.
How much for the cpip ons and the left foot peg, just the peg and pin to hold it on shipped to 67430? Do I ave to usr the bar ends?
Anybody got a left side mirror?
Still needing them parts.
Now out of clip on for the larger tanks. More coming in any day now. Other set can be shimmed to clear the larger tank. Put them on now then we swap clips when the other ones come in. $50 with bar ends $65.
Foot peg? $10 total (shipped UPS ground). Do you need a good clutch lever to go with it? I'll throw one in if you want.
Still have clean bar ends, just out of the screws and/or rubber bushings. Add $15 if you want a pair of really good clean bar ends.
PM me if you want to proceed.
Sorry about the delay - missed seeing your reply.
UPDATE: I'll get more bar end screws tomorrow at Aurora Suzuki
I have a left side mirror.
Mary
mary, how much for the mirror shipped to 67430? adidasguy, think i'll hold off on the clip ons for now but i'm still interested in the left rear foot peg.
Prior post:
Foot peg? $10 total (shipped UPS ground). Do you need a good clutch lever to go with it? I'll throw one in if you want.
Still have clean bar ends, just out of the screws and/or rubber bushings. Add $15 if you want a pair of really good clean bar ends.
PM me if you want to proceed.
NOTE: I would suggest the mouting plate with the foot peg in case there is some bending to your present one. If the foot peg is damaged, chances are the mounting point on the plate is bent or twisted a little. I believe I have both black and silver plates.
Hey sorry dude been working like crazy! $20+shipping!
Mary
Shoot me an email to my screen name at Gmail.com goes to my cell and I'll know!
Mary