The Front caliper was considerably dirtier than the rear, no doubt due to the R. leaking fork seal gumming it all up.
(http://inlinethumb36.webshots.com/45283/2403363160073478356S600x600Q85.jpg)
Removing the Caliper Mounting Bracket.
(http://inlinethumb39.webshots.com/13926/2405041550073478356S600x600Q85.jpg)
Shims/Spacers removed.
(http://inlinethumb24.webshots.com/46871/2578680170073478356S600x600Q85.jpg)
I don't even want to know what kinda of toxic waste/debris cocktail is coating this....Smaller Piston was a bit stubborn to pop out with air, but eventually it came out.
(http://inlinethumb60.webshots.com/47163/2898161710073478356S600x600Q85.jpg)
(http://inlinethumb35.webshots.com/47778/2302925910073478356S600x600Q85.jpg)
Here the F. Caliper has been completely dis assembled awaiting cleaning and painting.
(http://inlinethumb50.webshots.com/16049/2461691290073478356S600x600Q85.jpg)
All the parts have been cleaned, Caliper needs to be scuffed up for painting.
(http://inlinethumb16.webshots.com/45711/2476711050073478356S600x600Q85.jpg)
F+R Calipers scuffed for painting...
(http://inlinethumb13.webshots.com/35724/2549249090073478356S600x600Q85.jpg)
(http://inlinethumb64.webshots.com/47487/2106706670073478356S600x600Q85.jpg)
I'm using VHT Caliper paint, applied 4 coats, the last coat I baked on per there recommendations for an hour at roughly 200 degrees.
(http://inlinethumb53.webshots.com/8372/2528426040073478356S600x600Q85.jpg)
(http://inlinethumb36.webshots.com/47651/2723014890073478356S600x600Q85.jpg)
Rear Caliper finished.
(http://inlinethumb55.webshots.com/43062/2342371310073478356S600x600Q85.jpg)
Front Caliper finished.
(http://inlinethumb52.webshots.com/12403/2355515360073478356S600x600Q85.jpg)
Ready for final assembly, mounting, and bleeding.
(http://inlinethumb45.webshots.com/45740/2463826840073478356S600x600Q85.jpg)