GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: navyeagleeye86 on January 26, 2011, 12:51:20 AM

Title: GS500E - GS500F Exhaust
Post by: navyeagleeye86 on January 26, 2011, 12:51:20 AM
Just curious, would the exhaust from an '04 or newer GS500F fit on my 2002 GS500E? i noticed there are a lot more options for the F and i'm looking for something raspy and sporty sounding.

Thanks,
-J

(GS500K2)
Title: Re: GS500E - GS500F Exhaust
Post by: adidasguy on January 26, 2011, 01:33:02 AM
Would fit. Stock would sound the same. You'd need to get a V&H or Jardine or something else to get her to sound more like an obnoxious Harley. (Won't be that bad but will be louder than stock)
Title: Re: GS500E - GS500F Exhaust
Post by: navyeagleeye86 on January 26, 2011, 02:52:01 AM
I was looking at aftermarket exhausts, primarily from Vance&Hines, Jardine, & Yoshimura, with my eye on the Jardine.. The reason behind my question was I couldn't find anything but V&H for my model year (GS500K2) but was able to find many more options on the F models (2004-present) so I was curious if for example the Jardine from an '04 GS500F would fit ... They didn't modify the frame going into the F model in such a way that would make such a conversion impossible did they?
Title: Re: GS500E - GS500F Exhaust
Post by: Mart3y on January 26, 2011, 03:31:57 AM
I was sure I had an e-mail from a yoshi dealer saying that their TRS slip on for the GS500F would fit my 2002 GS500, but I can't seem to find it
Title: Re: GS500E - GS500F Exhaust
Post by: the mole on January 26, 2011, 03:54:49 AM
AFAIK any GS500 exhaust would be interchangeable.
Title: Re: GS500E - GS500F Exhaust
Post by: mike__R on January 26, 2011, 06:30:45 AM
What aftermarket exhaust can you put on and still use the centerstand?  I know the bike I got has D&D but the PO had to remove the centerstand.  I believe Vance & Hines you have to remove the centerstand as well.
Title: Re: GS500E - GS500F Exhaust
Post by: Toogoofy317 on January 26, 2011, 10:09:50 AM
There are a few models that won't go from "E" to "F" because of the oil cooler other than that I think just centerstand issues. But, I think buddha said all you had to do was attach a piece of tire or something rubber and it would be fine too  :dunno_white:

Mary
Title: Re: GS500E - GS500F Exhaust
Post by: adidasguy on January 26, 2011, 11:20:33 AM
I have V&H on Junior. Center stand still there.
You do have to loosen one nut for it to mount the V&H then re-tighten it.
Maybe your PO thought that meant to remove it?
You can see the pix of Junior on the center stand with the V&H.
(http://i1206.photobucket.com/albums/bb442/adidasguy/GS500/IMGP0891bc.png)
Title: Re: GS500E - GS500F Exhaust
Post by: mike__R on January 26, 2011, 12:11:16 PM
Quote from: adidasguy on January 26, 2011, 11:20:33 AM
I have V&H on Junior. Center stand still there.
You do have to loosen one nut for it to mount the V&H then re-tighten it.
Maybe your PO thought that meant to remove it?
You can see the pix of Junior on the center stand with the V&H.
(http://i1206.photobucket.com/albums/bb442/adidasguy/GS500/IMGP0891bc.png)

PO had it set up for racing so it might have just been removed for weight savings too.  I don't know.

I do know that it's a pain now with the D&D - I have to loosen the exhaust just to change oil.
Title: Re: GS500E - GS500F Exhaust
Post by: tb0lt on January 26, 2011, 01:03:51 PM
I've had a 100% stock E running next to a 100% stock F and the F sounded better with the factory exhaust. That could be due to the fact that the F has larger diameter pipes and a slightly larger exhaust can. As far as fitment.... I can't tell ya.
Title: Re: GS500E - GS500F Exhaust
Post by: navyeagleeye86 on February 02, 2011, 04:33:58 PM
I'm wondering if a Jardine full exhaust system from an "F" would fit my "E" ...
Title: Re: GS500E - GS500F Exhaust
Post by: Pelikan on February 02, 2011, 04:45:53 PM
I know that the '04 F has a smaller diameter pipe when compared to '05 and later (which I think is a carry-over from the E).  The Yosh TRS slip-on will not fit '04 and earlier bikes without a modification (i.e. taking it to an exhaust place and having them weld on an adapter for ~$50).  I know a lot of people have V&H on the older bikes, and from what I gather the Jardine will fit too with no problem.

See below:

http://gstwins.com/gsboard/index.php?topic=47768.0 (http://gstwins.com/gsboard/index.php?topic=47768.0)
http://gstwins.com/gsboard/index.php?topic=53978.0 (http://gstwins.com/gsboard/index.php?topic=53978.0) (Refer to title)
http://gstwins.com/gsboard/index.php?topic=52352.msg591300#msg591300 (http://gstwins.com/gsboard/index.php?topic=52352.msg591300#msg591300)

And there are more threads out there, but I think the consensus is, it'll fit no prob.
Title: Re: GS500E - GS500F Exhaust
Post by: adidasguy on February 02, 2011, 04:58:24 PM
The gasket is the same part number which means the opening on the engine is the same diameter.

GASKET, EXHAUST PIPE
14181-01D00

Frame mounting in the rear is the same as far as I can tell. Should fit.
The 01-02 "E" is basically an "F" without the fairing. It is not the same as the 89-00 "E"'s.
They did change the header bolt from one with a shoulder to one without and added a washer. Whoopie. Like that makes any difference.
Title: Re: GS500E - GS500F Exhaust
Post by: navyeagleeye86 on February 18, 2011, 03:01:56 PM
Awesome, thanks guys, I think I'm locked in on an "F" Jardine full exhaust for my '02 "E" ... Aftermarket parts seem really hard to come by with this bike though, I can't even find aftermarket taillights or fender eliminators anywhere!?!
Title: Re: GS500E - GS500F Exhaust
Post by: adidasguy on February 18, 2011, 04:04:53 PM
2001-2002 "E" is pretty much the same as 2004-present "F" minus the fairing.

Just ask for what you're looking for. The stuff is available. Lots of us have tons of extra parts or can point you to where to get them.

Nicest tail lights are from (better than clear alternatives)
http://stores.ebay.com/lights4all/_i.html?_nkw=gs500&submit=Search&_sid=110699378

Seats:
(http://i1206.photobucket.com/albums/bb442/adidasguy/GS500/DSC00849a.jpg)

Crash sliders
(http://i1206.photobucket.com/albums/bb442/adidasguy/GS500/IMGP0910a.jpg)

Suzi has: Smoke turn signals, smoke LED tail light, bar ends, side markers, helmet lock on license plate, rear luggage rack, clip-on bars, mirror extenders, fog lights, exhaust protectors, rear hugger, wheel stripes, etc.
(http://i1206.photobucket.com/albums/bb442/adidasguy/GS500/IMGP0873a.jpg)

Junior (red bike) has stainless steel chain guard, belly pan, headlight cowling, Gimbel rear sets and other things.