Hey Gstwin,
I'm looking to upgrade my front sprocket, I don't highway ride much so high revs in 6th gear doesn't concern me...
I was thinking either a 13t or 14t sprocket for the front. What size chain should I look into? I didn't want to cut my stock chain if I can avoid it. Not feeling too confident in that area :cookoo:
Is there a chain size that will be "plug-and-play" with a stock rear sprocket and a 14T or 13T?
Havn't decided yet to go for the 13 or 14 yet, but I will!
Thanks!
You can use the wiki and the chain length calculator to figure this out. I believe dropping more than 1 tooth will require a shorter chain.
http://wiki.gstwins.com/index.php?n=Upgrades.Sprocket
http://tsubaki.com.au/tsscs/chain_length.htm
Thanks ut, checking it out now!
Looks like a stock chain is 110 links, and you'd need 109 links with a 13 tooth front sprocket (assuming stock in rear).
So technically, I can just buy aother 110 chain and take out a link?
Never done this before...
What do I need to know? Like what tools I need, what to look out for, and any other tips/advice
I've never bought a new chain, but I'm assuming you could buy a 109 tooth chain?
Looked in some places, can't find..
Spoke with someone at BikeBandit.... he said I needed a 520-104 if I'm going to a 13t with a 39T rear.
Can anyone confirm?
Must have an even number of links unless you have a special offset link. Looks like a 108 link chain would work with 13/39T or 14/39T. You could probably use your 110 link with the 14/39T. Would just have less adjustment until you run out of slot in the swing arm as the chain wears. I've saved the ones I've calculated already:
http://gstwins.com/gsboard/index.php?topic=44849.msg502495#msg502495
Thanks GSJack
I just ordered the sprocket online, having my dealer adjust the chain and put it on for me..
Saving me the hassle. Chain is in great condition so if I can save $50, I'll be happy.