As a way to say thanks to all the fine people here and all the good info on GSTwins, I am now giving away all the parts I have left - just pay shipping. All shipping quotes are for the US only. If you live outside the US, I will try to ship as reasonably as possible. If more than one item will fit in a shipper, I will throw in whatever fits for one price. Most are from mid 90's bikes. Everything is in good shape/functional. I am in Oregon and I ship via USPS priority mail. I take Paypal. Here is a list of what I have left:
1. A starter motor. Worked great when I pulled it. $12
2. A pair of cams (one intake, one exhaust) stock grind from the same engine. Great shape. $12
3. Shipping for any of the next items is $6 each. All are in working order. A) a 16 tooth (stock gearing) front sprocket. B) A rear axle, straight. C) A mechanical tach drive gear with O-ring. D) A drive chain tensioner, not stripped. E) An oil filter cover with spring, nuts and O-ring. Nice shape. F) A rear brake bracket. G) A breather cover with gasket.
PM me or email me at Kladnek@h o t m a i l dot com. Thanks for looking! Ken
(http://i1018.photobucket.com/albums/af303/Kladnek/bikeparts007.jpg)
(http://i1018.photobucket.com/albums/af303/Kladnek/bikeparts011b.jpg)
(http://i1018.photobucket.com/albums/af303/Kladnek/bikepartcollage.jpg)
(http://i1018.photobucket.com/albums/af303/Kladnek/bikeparts006b.jpg)
Brake line and Cam Chain tensioner are gone. Thanks CenturyGhost!
"6. A full set of cam caps, studs, buckets and 4 shims. All from the same head (head had a bent valve so I tossed it). I know that you are not supposed to "re-use" the cam caps, but maybe you want to give them a try. I personally would use one before I left a busted one in place, but YMMW. I will also throw in another couple valve shims (6 total). I don't know the shim sizes off hand, but I could measure them if you are interested. I know that they all fall within the mid range of available thicknesses. $20 for everything."
I need these items pretty bad. Just took my valve cover off to find that "D" CAM CAP was cracked in half..... :sad:
How would you like payment?
PM sent.
Cam caps, buckets, shims, SOLD! Thanks Dastardly_Dog!
New lower prices, more items free. Take another look.
Quote from: Nemesis X on May 03, 2011, 09:07:26 PM
Cam caps, buckets, shims, SOLD! Thanks Dastardly_Dog!
:
:D Fantastic transaction.... Thanks Nemesis X!!!!! Just got everything today. :D
Is that torque arm bent to fit a wider wheel? If so which one? I saw it and wanted to buy for that very purpose!
Andrew.
Hello Andrew - The rear torque arm is bone stock; not bent or modified. Ken
Thanks! The brake line fits perfect :woohoo:
Thanks again for your purchase CenturyGhost. I'm glad to hear the line worked for you.
Quote from: dastardly_dog on May 06, 2011, 05:45:45 PM
Quote from: Nemesis X on May 03, 2011, 09:07:26 PM
Cam caps, buckets, shims, SOLD! Thanks Dastardly_Dog!
:
:D Fantastic transaction.... Thanks Nemesis X!!!!! Just got everything today. :D
Thanks for your purchase Dastardly_Dog! I'm glad the parts got to you so quickly.
Hi,
Are the front brake master cylinder, front brake caliper and handlebar bar end still available?
If so, I'm interested.
Let me know, and thanks!
Trwhouse
Quote from: Trwhouse on May 11, 2011, 11:50:46 AM
Hi,
Are the front brake master cylinder, front brake caliper and handlebar bar end still available?
If so, I'm interested.
Let me know, and thanks!
Trwhouse
PM sent!
Rear brake pads sold. Thanks CmdrPopNFresh!
Hi again,
OK, the money is on its way via Paypal.
Thanks again man.
Yours,
Trwhouse :)
Hi Ken,
It's me again!
I just sent the Paypal money for the front caliper, master cylinder and bar end.
Would you mind also including the "free" rubber carb manifolds and the old stock petcock?
I'd like to try the petcock modification and not use my existing unit.
I hope you can still include these for me!
Thanks man!
Yours,
Trwhouse
Quote from: Trwhouse on May 13, 2011, 10:17:44 AM
Hi Ken,
It's me again!
I just sent the Paypal money for the front caliper, master cylinder and bar end.
Would you mind also including the "free" rubber carb manifolds and the old stock petcock?
I'd like to try the petcock modification and not use my existing unit.
I hope you can still include these for me!
Thanks man!
Yours,
Trwhouse
Thanks for the purchase TRWHouse!
I might need that starter motor. I should know more tomorrow.
Quote from: Trwhouse on May 13, 2011, 10:17:44 AM
Hi Ken,
It's me again!
I just sent the Paypal money for the front caliper, master cylinder and bar end.
Would you mind also including the "free" rubber carb manifolds and the old stock petcock?
I'd like to try the petcock modification and not use my existing unit.
I hope you can still include these for me!
Thanks man!
Yours,
Trwhouse
Thanks for the purchase Trwhouse! Your package shipped today.
Final listing - Help me clean out my parts.
Do you still have to torque arm? If so I'll take it.
Quote from: NUISANCE on May 25, 2011, 11:26:17 PM
Do you still have to torque arm? If so I'll take it.
Yep, I have the torque arm. PM sent.
The torque arm is gone. Thanks Nuisance!