just want to post a few pics of my new sliders!!!!(http://img705.imageshack.us/img705/4562/sam0042f.jpg)(http://img402.imageshack.us/img402/5335/sam0039b.jpg) (http://imageshack.us/photo/my-images/705/sam0042f.jpg/)
Where did you get it? I have sliders but those ones have a much stronger supporting system
Also, let me suggest you to host images on www.postimage.org
Quote from: Yuri. on June 20, 2011, 09:24:48 PM
Where did you get it? I have sliders but those ones have a much stronger supporting system
Also, let me suggest you to host images on www.postimage.org
here is the web site.....http://t-rex-racing.com/catalog.php?item=253 (http://t-rex-racing.com/catalog.php?item=253) also you can buy on E-Bay......http://cgi.ebay.com/ebaymotors/T-Rex-Suzuki-04-on-GS500F-Frame-Sliders-No-Cut-_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3dUCIQ26otnQ3d1Q26poQ3dLVIQ26psQ3d63Q26clkidQ3d794913374093573160QQ_trksidZp5197Q2em7QQitemZ290574284358 (http://cgi.ebay.com/ebaymotors/T-Rex-Suzuki-04-on-GS500F-Frame-Sliders-No-Cut-_W0QQcmdZViewItemQQ_trkparmsZalgoQ3dLVIQ26ituQ3dUCIQ26otnQ3d1Q26poQ3dLVIQ26psQ3d63Q26clkidQ3d794913374093573160QQ_trksidZp5197Q2em7QQitemZ290574284358)
I use the T rex slider on my Ducati Monster. Cheap and a quality product. I know a few guys on the site have purchased these for there GS's and found they were missing parts but I had no troubles with mine.
no fairings? :icon_sad:
On the Ebay listing, there are pictures of where they come out on fairing bikes :thumb: Looks like the lower fairing has to come off for installation.
Quote from: LEMON8 on June 21, 2011, 04:12:37 AM
no fairings? :icon_sad:
both fairings come off for the install... real simple to do..... just make sure you don't over torque the bolts..... no problem with missing parts.....
i was debating between the r&g and the t-rex sliders but went with the r&g's. something about bolting it into the case just didn't sit right with me.
anyway,do you feel any flex in the parts? does it feel like it would put alot of pressure on the case bolts in a crash?
Quote from: reload on June 21, 2011, 03:34:42 PM
i was debating between the r&g and the t-rex sliders but went with the r&g's. something about bolting it into the case just didn't sit right with me.
anyway,do you feel any flex in the parts? does it feel like it would put alot of pressure on the case bolts in a crash?
solid big time.. no play at all... and the 2 main long bolts would take most of the pressure in a hardcore drop..but I am no expert.....The bolts are made of highest grade commercially available 12.9(177,000 psi in tensile strength)
What about us guys with the older bikes?
Quote from: ben2go on June 22, 2011, 11:41:48 AM
What about us guys with the older bikes?
This should fit 89-00, the thing is, you can hammer up pipe to fit an 89-00. Actually 89-02 Very easy. The fairing is what makes it hard for the case guards.
Cool.
Buddha.
Those look like good foot rests for long highway rides :icon_mrgreen: