GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: LEMON8 on July 18, 2011, 04:25:15 AM

Title: how do LED turn signals wire up
Post by: LEMON8 on July 18, 2011, 04:25:15 AM
http://cgi.ebay.com/ebaymotors/2x-18-LED-Motorcycle-Turn-Signals-Suzuki-GS400-GS500-_W0QQcmdZViewItemQQhashZitem29ffecd149QQitemZ180387369289QQptZMotorcyclesQ5fPartsQ5fAccessories#ht_4458wt_1165

The previous owner of my bike installed these in the front. At the time of purchase they both worked, its been about 3 months now and i just looked at it the other day and saw my right one doesn't work but left does. Rear signal is working as well.

Is there a relay that powers both L and R or are they 2 diffrent relays. I'm trying to figure out if it could be bad bulbs, wiring, or w/e else. Right now i'm leaning towards bad bulb/circuit board on that side. Since rears and left works.
Title: Re: how do LED turn signals wire up
Post by: numus on July 18, 2011, 05:30:39 AM
Make sure the connections under the headlight are still connected. What year GS500 is this? IDK about the 04+ but on the GS500E, under the right side fairing is the single relay for the blinkers.
Title: Re: Re: how do LED turn signals wire up
Post by: LEMON8 on July 18, 2011, 09:26:05 AM
Nevermind one connection just got unplugged. The owner sucks ass in terms of clean wiring. His electric taping is horrible along with his splicing and but connection.

Ill redo this and clean everything up later, its 90 degrees right now.

Sent from my Nexus One