Print Page - Jardine exhaust with stock air box/filter ???

Title: Jardine exhaust with stock air box/filter ???
Post by: dam on July 18, 2011, 10:29:18 PM

So I've searched and read and checked the Wiki. Still don't know what to make of it all :icon_confused: With a 2009 GS500F all stock. What would you recommend if I were to change only the exhaust to a Jardine RT1 with their QMI (quiet module insert)?

http://www.jardineproducts.com/products/searchType/vehicleSearch/year/2009/make/SUZUKI/model/GS500F/sfID1/28/sfID2/8/sfID3/10/productID/811

http://www.jardineproducts.com/products/productID/722

Title: Re: Jardine exhaust with stock air box/filter ???
Post by: ben2go on July 19, 2011, 07:04:14 AM

Not quite sure what you're asking.If you're asking about jetting,save the exhaust for when you upgrade the air filter.Then rejet once and be done.

Title: Re: Jardine exhaust with stock air box/filter ???
Post by: The Buddha on July 19, 2011, 07:57:00 AM

Dam: With just pipe - run 20 pilots, 132.5 mains, 1 washer under needle. That actually is the same as what we mod the stock bike to, yea a stock bike is jetted just a hair leaner than it needs to be happy. Anyway I sell a jet pack for the setup you'd use, which costs - $25 shipped in US, $27 anywhere in the world.

Ben2go: - He never mentioned a filter, he just wanted to jet it with pipe and quiet insert. You dont have to do filter just pipe is fine.

Cool.
Buddha.

Title: Re: Jardine exhaust with stock air box/filter ???
Post by: dam on July 19, 2011, 08:24:06 AM

That's what I was asking. Just the exhaust, no change from stock filter.
Thanks :thumb:

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: dam on July 18, 2011, 10:29:18 PM