My parts bike is missing a plug wire but the coil is still there. Is there a way to get just the wire? All the ones I see on ebay are wires+coils.
Thanks,
Most likely 7mm (measure the wire on the other side)- any auto parts store should have them.
As far as attaching it to the coil, I dunno about the stock ones. Theoretically, you should be able to expose some wire and epoxy it inside the coil. But I haven't done it myself, so that's just a guess.
The plug wire screws into the coil. Just cut it off square and screw it in tight, best to put a big dab of dielectric grease on it before screwing it in. I had a loose one on my 02 GS and I trim it or replace it about once a year when I check valves. They can work loose if not bonded in like oem come. Got a 6' length of wire from Dennis Kirk for a few bucks years ago.