As a companion to the fork seal video, here's some pics of the special tools used in the video. Video Here: http://www.youtube.com/watch?v=8cSYiIl8gQk
The upper tool is just a cut down piece 1.5" PVC pipe used to drive in the new seal. The lower tool is a piece of 5/8" all thread with 4 nuts. The nuts are tightened againt each other like old school lock nuts so they stay fixed on the all thread. Take a 24mm wrench or socket with you to make sure you get the proper sized nuts. This tool will not work on '04-up models. The third tool is just a battery filler but a turkey baster would also work. Just mark off your desired air gap to set the fork oil level. Hope this helps :thumb:
-Jessie
(http://i735.photobucket.com/albums/ww360/jessiedoran/tool1.jpg)
(http://i735.photobucket.com/albums/ww360/jessiedoran/tool2.jpg)
(http://i735.photobucket.com/albums/ww360/jessiedoran/tool3.jpg)