Looking for one in good condition w/ connection pieces (if available) - paypal ready. Message me with pictures and prices please.
Shipping to 14305 in Niagara Falls, NY or M3M 1k3 in Toronto, Ontario Canada
Thanks
While you're at it I want one as well but in Australia
This is where I got mine. http://superbikestore.com/gs500.htm
Quote from: Grommett2k on March 15, 2012, 06:14:26 PM
This is where I got mine. http://superbikestore.com/gs500.htm
Thank you sir!
How easy was the install, does it move around much or is it a snug fit?
Quote from: Shanehsmp on March 16, 2012, 07:13:39 AM
Quote from: Grommett2k on March 15, 2012, 06:14:26 PM
This is where I got mine. http://superbikestore.com/gs500.htm
Thank you sir!
How easy was the install, does it move around much or is it a snug fit?
Fits good. No issues with it being loose or anything. Only thing I had to do was grind out a little half moon shaped spot where the exhaust was touching it. Other than that, the pics you see on the website are of it mounted on my bike. I sent them pics after install so they could put them their site.
Quote from: Grommett2k on March 16, 2012, 03:31:10 PM
Quote from: Shanehsmp on March 16, 2012, 07:13:39 AM
Quote from: Grommett2k on March 15, 2012, 06:14:26 PM
This is where I got mine. http://superbikestore.com/gs500.htm
Thank you sir!
How easy was the install, does it move around much or is it a snug fit?
Fits good. No issues with it being loose or anything. Only thing I had to do was grind out a little half moon shaped spot where the exhaust was touching it. Other than that, the pics you see on the website are of it mounted on my bike. I sent them pics after install so they could put them their site.
Is it possible, you could post pictures of what's holding the belly pan to the bike? I bought one and the person who sold it to me did not include hardware. I want to see if I can just pick up the hardware myself at a store. Thanks.
Here's a diagram I drew for someone to show how to make fairing mounts.
(http://i1206.photobucket.com/albums/bb442/adidasguy/DSC00513.jpg)
Quote from: adidasguy on May 02, 2012, 02:19:35 AM
Here's a diagram I drew for someone to show how to make fairing mounts.
(http://i1206.photobucket.com/albums/bb442/adidasguy/DSC00513.jpg)
I take it, the second image is the make shift mount is after it's tightened down?
You're suggesting bending some kind of metal?
Two different ideas.
The top one uses the metal pipe clamps with the rubber on the inside.
The bottom one is a flat metal piece with a square "U" clamp type of bolt to hold it to the frame.
Quote from: adidasguy on May 02, 2012, 02:54:41 AM
Two different ideas.
The top one uses the metal pipe clamps with the rubber on the inside.
The bottom one is a flat metal piece with a square "U" clamp type of bolt to hold it to the frame.
Specific sizing?
Sent from my PC36100 using Tapatalk 2
Another thread in main area shows them. "Cushion Clamps". I didn't now what were called.
http://gstwins.com/gsboard/index.php?topic=51722.msg696095#msg696095
Quote from: Grommett2k on March 15, 2012, 06:14:26 PM
This is where I got mine. http://superbikestore.com/gs500.htm
[/quote
I got this same one from another company...very satisfied with it. Fairly easy to mount, you've just gotta play with it for a bit. I didn't cut a little half moon out...the exhaust made its own...but its 0% noticeable. But it really does make the bike look a whole lot better.