i think im gettin a k&n replacement air filter pretty soon. i also have a cobra f1r slip-on. do i need to rejet when/if i get a k&n?
There's a matrix on an earlier thread that has modifications, and suggested jet sizes. You'll probably have to increase the mains by 1-2 sizes richer (125-127.5), and raise the needle another .5mm if you haven't done so already. BTW, I noticed when I looked at pics from your site that you are running an oversize rear tire. What is it? :cheers:
QuoteBTW, I noticed when I looked at pics from your site that you are running an oversize rear tire. What is it?
its no oversized. i have 96. the year where the rim and engine is dark. its just the rim is bout the same color as the tire, not oversized.
Here it is ! Only thing is that K&N has 2 filters the clamp on ( no air box )
and the normal that goes to the air box type I'm sure they need to be
jetted differently .
Pre 2001
Exhaust.....|.Air Filter.....|.Pilot.....|.Main.........|.#4Washers..|.Turns|Note
................|..................|............|.................|..or Kit.........|.........|
1...Stock...|Stock..........|40.........|125...........|1.................|3.........|
2...Stock...|UniF(s)........|40.........|125...........|1.................|3.........|
3...Stock...|K&N(s)........|40.........|127.5........|2.................|3.........|
4...Stock...|UniF(p)........|40.........|................|...................|..........|
5...Stock...|K&N(p)........|40.........|147.5........|2.................|2.5......|p,1
6...Perf.....|Stock..........|40.........|.................|...................|..........|
7...Perf.....|UniF(s)........|40.........|.................|...................|..........|
8...Perf.....|K&N(s)........|40.........|.................|...................|..........|
9...Perf.....|UniF(p)........|40.........|.................|...................|..........|
10.Perf.....|K&N(p)........|40.........|140 - 150...|2..................|3 - 3.5|
11.Perf.....|K&N(p)........|40.........|140 - 150...|K&N3............|3 - 3.5|
12.V&H.....|UniF(s)........|40.........|127.5.........|2.................|3.........|sr,1
13.SV650..|UniF(p).......|40.........|135............|1..................|3.........|
Hey nice matirx :thumb: , should we assume that any cell with just dotted lines indicates same as above?
I wish I knew .... :mrgreen:
Im in the process of setting up Cobraf1 + k&n pod going from 140 mains
untill 150 untill I find my sweet spot .