I know this is my first post, but i just finished stripping a free gs500 I got in order to build my track bike. So the few decent parts I have im giving or selling cheap to make room for new parts.
Got a few things from a 89 GS500.
Seat: Free
Decent shape, couple small tears
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0271.jpg)
Motor: $40
Mileage/condition unknown. PO said it has been sitting for quite some time. Complete with dirty carbs and air box. Again I have no idea the condition on the motor.
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0266.jpg)
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0264.jpg)
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0263.jpg)
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0262.jpg)
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0261.jpg)
Exhaust: $20
Stock header and silencer no dings, good condition
Tailight: $10
Good condition, just a little dirty, no cracks
Front forks/wheel/brake - No triples or stem- $20
I will be keeping the triples/stem assembly for a front end swap
(http://i178.photobucket.com/albums/w241/catch2otwo/gs500/IMG_0270.jpg)
Stock undertail - good condition, no cutting 15$
Center stand with springs - 10$
Located in SF bay area, Id really prefer not to ship the big items
Dibs on the tail fairing? I really just want the centre part of it and the rest can go to adidas
(http://smileys.on-my-web.com/repository/Tongue/making-fun-054.GIF)
Wish I lived closer for that motor.
Would love to try to build a low compression beast, blueprint it, fuel inject it, and turbo the sunovabitceh
-deleted-
Does the metal mount that holds the Speedo and the tach still have all the little colored covers for the bulbs(oil, nuetral, turn, and high beam)? If so how much do you want for it?
Sent from my SPH-D710 using Tapatalk
Quote from: Manaenrc on April 02, 2012, 07:56:22 PM
Does the metal mount that holds the Speedo and the tach still have all the little colored covers for the bulbs(oil, nuetral, turn, and high beam)? If so how much do you want for it?
Sent from my SPH-D710 using Tapatalk
they do in the bottom pic if you didnt notice it.
and wish you were near Pa.
I would be all over that engine as well hahaa
Quote from: codajastal on April 02, 2012, 06:47:01 PM
Dibs on the tail fairing? I really just want the centre part of it and the rest can go to adidas
(http://smileys.on-my-web.com/repository/Tongue/making-fun-054.GIF)
I don't need the sides. need more centers for people that need tail sets.
Ignition control box? Looking for a spare.
The plastic caps from instrument bracket?
Quote from: Manaenrc on April 02, 2012, 07:56:22 PM
Does the metal mount that holds the Speedo and the tach still have all the little colored covers for the bulbs(oil, nuetral, turn, and high beam)? If so how much do you want for it?
Sent from my SPH-D710 using Tapatalk
Pm returned, sorry but i tossed it and dumpster dove but couldnt find it.
Quote from: Manaenrc on April 02, 2012, 07:56:22 PM
Does the metal mount that holds the Speedo and the tach still have all the little colored covers for the bulbs(oil, nuetral, turn, and high beam)? If so how much do you want for it?
Sent from my SPH-D710 using Tapatalk
Pm returned, sorry but i tossed it and dumpster dove but couldnt find it.
Quote from: adidasguy on April 02, 2012, 09:00:37 PM
Quote from: codajastal on April 02, 2012, 06:47:01 PM
Dibs on the tail fairing? I really just want the centre part of it and the rest can go to adidas
(http://smileys.on-my-web.com/repository/Tongue/making-fun-054.GIF)
I don't need the sides. need more centers for people that need tail sets.
Ignition control box? Looking for a spare.
The plastic caps from instrument bracket?
Which one is the ignition box? Whats it look like? Unfortunately I tossed the instrument bracket and couldnt find it in the dumpster tonight
Also if your not picking up in person, let me know the zip code you want it shipped to and I can give you a shipped price. not sure if its worth shipping things like the tail plastics but if you really want I can get a quote
zip: 98116
Really just the tail center. I have LOTS of side panels.
Ignition: It was on the left side attached to the battery box.
(http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/1989%20and%201996%20part%20out/IMG_2928.jpg)
Quote from: adidasguy on April 03, 2012, 09:31:51 PM
zip: 98116
Really just the tail center. I have LOTS of side panels.
Ignition: It was on the left side attached to the battery box.
(http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/1989%20and%201996%20part%20out/IMG_2928.jpg)
Are trying to steal the tail piece out from under me?
.....just messin' with ya.
Quote from: adidasguy on April 03, 2012, 11:04:53 PM
.....just messin' with ya.
so am i cause i dont really want it but i knew you did, sticks fingers up and toungue out.
Quote from: adidasguy on April 03, 2012, 11:04:53 PM
.....just messin' with ya.
I think I have that box, let me find it. If you want i could throw the whole harness in a tiny box if you want to pay the shipping. The shipping on the whole harness will probably only be a couple bucks more then shipping the little ignition box. probably under 10 bucks.
The tail fairings are already gone to another member. If it falls through ill let you guys know. pm your shipping info so I can get a quote for you.
I'd like the motor, wiring harness, side covers - yea center can go to that guy feeling up his boobies, and a bunch more - now where are you ? shipping could kill the deal ... My zip is 28269.
Cool.
Buddha.
Yes, where are you? I need that motor too. Maybe you're within driving distance for me? I need clean fork sliders too. Mine are rusted.
Sent from my T-Mobile G2 using Tapatalk
Quote from: 5thAve on April 04, 2012, 06:03:30 AM
Yes, where are you? I need that motor too. Maybe you're within driving distance for me? I need clean fork sliders too. Mine are rusted.
Sent from my T-Mobile G2 using Tapatalk
Located in SF bay area, Id really prefer not to ship the big items
^^ he posted on the very bottom of his initial post.
if you missed it.
West coast? Damn. I thought you were North-East. Too bad for me.
Quote from: catch2otwo on April 04, 2012, 05:24:33 AM
Quote from: adidasguy on April 03, 2012, 11:04:53 PM
.....just messin' with ya.
I think I have that box, let me find it. If you want i could throw the whole harness in a tiny box if you want to pay the shipping. The shipping on the whole harness will probably only be a couple bucks more then shipping the little ignition box. probably under 10 bucks.
The tail fairings are already gone to another member. If it falls through ill let you guys know. pm your shipping info so I can get a quote for you.
That sounds fine.
Whatever makes it easier for you.
pm's replied with shipping costs. so far looks like the harness and tail plastics are spoken for.
Did someone ask me about the motor mount bolts?
Edit: Tail plastics are sold.
all paid for parts have been shipped and pms have tracking numbers
Gave you some (http://i1206.photobucket.com/albums/bb442/adidasguy/Videos/popcorn.gif) because I got the tracking number even before I sent the paypal.
Quote from: adidasguy on April 05, 2012, 04:46:31 PM
Gave you some (http://i1206.photobucket.com/albums/bb442/adidasguy/Videos/popcorn.gif) because I got the tracking number even before I sent the paypal.
what exactly does that mean? haha
Quote from: catch2otwo on April 05, 2012, 05:46:27 PM
Quote from: adidasguy on April 05, 2012, 04:46:31 PM
Gave you some (http://i1206.photobucket.com/albums/bb442/adidasguy/Videos/popcorn.gif) because I got the tracking number even before I sent the paypal.
what exactly does that mean? haha
KARMA as in "karma corn" (sorry, the smiley is buttered popcorn)
Got the stuff today. Thanks a bazillion!
bump
everything remaining is now free. local pick up please no time to ship. only thing im keeping is the triple tree.
bump
I'd like to buy the front fender and fork brace if it;s not cracked. PM'd you. classiccats2@yahoo.com
fork brace and front fender sold. still have the rest of the front end and some odds and ends. please pm if you think i may have it