Well, I'm adding another bike to the staple and the wife says one of them has to go so the project will be parted out. There are a lot of good parts in the mix and if you don't see something that you need just ask as I probably have it. If you would like to buy everything as a whole, pm me and we can work out a deal (Have clean title in hand).
The good: Most of the parts are new or have been cleaned/ painted.
The bad: The motor is in need of some work, I purchased the bike not running and never determined the source so the motor will need to have some work. Valves are out of spec, one of the valves is stuck open, and the stator was toast when I took it out other than that it has good compression and has about 24k in mileage.
The best way to reach me is via email: milezero5@yahoo.com
Now to the parts
Prices do not include shipping and everything is best offer
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00326.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00328.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00327.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00325.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00323.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00324.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00322.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00320.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00321.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00318.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00319.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00316.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00317.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00315.jpg)
Front wheel (repainted, bearings spin freely, rotor in good shape)
With a new Avon road rider front tire 160
Rear wheel (repainted, bearings spin freely, rotor in good shape, JT oem tooth sprocket in good shape)
With Kenda Cruiser S/T tire 90% tread 160
Front brake caliper (03 sv650) with good pad life and used front brake line 40
Rear brake caliper with good pad life and stainless steel line as well as master cylinder 50
Front forks (repainted gold, new progressive springs, fresh 15w Suzuki fork oil, new fork seals)
Includes oem fork brace 160
2006 R6 rear shock in great shape including all needed linkage to install 70
Sigma bike computer 20
Clip-ons (unknown ebay brand) 50
Turn signal/ Kill switch controls (newer style from an F model) 40
Headlight and housing 40
Bike master chain (new in package) 60
Vance and Hines exhaust (sandblasted and unpainted, has some scrapes on the muffler section)
Make offer
Ebay foot pegs grinded down to fit (includes mounting brackets) 30
New oil pan gasket 20
New stator cover gasket 20
New cam chain tensioner gaskets x2 5 each
New coil packs Make offer
New spark plugs x2 3 each
New clutch cover gasket 20
JT 15T front sprocket 15
Valve cover repainted with new breather gasket installed and new valve cover gasket 40
New EBC clutch and springs 75
Seat (recovered) Make offer
Fuel tank (comes with petcock, new petcock gasket, gas cap with key, has surface rust on inside but nothing major)
Would like to sell with the side panels, front mudguard, and rear filler panel since they were all repainted the same color on top. 220 for panels, tank, and guard
Frame with title (includes rear sub frame) Make offer
1992 Motor freshly painted (includes unpainted sandblasted stator cover, oil pan, new oil filter, new oil filter, new filter o ring, new exhaust gaskets and intake carb boot gaskets) Make offer
I also have a lot of other misc. items such as oem intake box with K&N drop in filter, throttle tube, engine harness, good condition rpm gauge, black & yellow side panels, clutch lever, brake lever with master cylinder, sand blasted rear grab rail, new cables ( throttle, choke, etc.) if you don't see it just ask All of those things are OBO.
Thanks for looking
You have a pm on your tank, and bodywork
PMed on sprocket and pegs
Just curious on the headlight shipped to Canada?
You don't happen to have one of airbrush's rear huggers, do you?
No def. No rear hugger these plastics were painted by a friend of mine when i worked at nissan
Pms answered
(http://i805.photobucket.com/albums/yy339/milezero5/DSC00317.jpg)
I need that guy in the middle,below the plugs. Goes to the bottom of the fuel tank, while removing one of my lines the brass "nipple"? pulled out with the hose. Bikebandit calls it the Fuel chicken assembly.
I might be interested in that R6 shock, and SS brake line aswell, maybe we can work a deal.
You can just press that nipple back in with a rubber mallet. I've done it twice with mine... Sorry to OP for thread jack.
PM on the carbs
Quote from: milezero5 on June 20, 2012, 02:36:49 PMif you don't see it just ask
Thanks for looking
Do you have a set of stock handle bars laying around?
No sorry no stock handlebars pms replied lmk if they didnt go through
Quote from: milezero5 on June 24, 2012, 02:24:29 PM
No sorry no stock handlebars pms replied lmk if they didnt go through
Cool. Thanks.
Hi I may Be interested in Your Tank, Fender + rear fairing. (Painted Parts) Can I get Shipping costs to Canada Postal Code S7M-1T3 Thanks RHebb
I'm interested in the V&H exhaust.
Do you know how much it would cost to ship to OH? 44107 specifically?
I was wondering if by chance you would be willing to part with that sandblasted case cover (white)http://i805.photobucket.com/albums/yy339/milezero5/DSC00326.jpg? I imagine you wouldn't but it's worth a shot thanks
i am interested in tank and panels
Email sent on the K&N lunchbox filter.
Im interested in the tank and those handle bars...do i have to buy the tank and fender or just the tank...and do u have a front wind screen?
Make me an offer on what you are interested
Sorry no windscreen
Not sure what to even offer....what's the tank condition?....and are those handlebars giona bolt right up on a 1999 s :woohoo:tock 500e
Yea the bars would mount right up
I would prefer to ship the tank and plastics together
i will take the front foot pegs if still avail
R6 tail light arrived yesterday.
Positive trading feedback left on your profile.
Thanks.
What u looking to get for the bars?
i will take the original black n yellow rear side plastics abd the after market front foot peg.
Hi I'd love to buy that Vance and Hines if it's the full system. Pm me or text me at 251-263-1900. Thanks man.
Hi,
Did you ever sell the R6 rear shock? I saw another user was interested in it. Please let me know if you still have it.
Thanks
Dave
you still got that r6 rear shock??