yes being broke slows this shiite down a bit. but it keeps my mind on a level playing field/level plane. as far as pc build plans goes am going to go with this:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1970063&csid=_61 i can upgrade the cpu later on. which in itself isnt bad. the gpu needs help though. another hundred covers that. . now to gopeds:
http://www.goped.com/products/gsrsport/default.asp its a gsr40. the one stolen from me was a gsr25. which i built piece by piece. , now to motohuffy:
am getting my hands on a tap set at friends pawn shop tomorrow and will have block prepared soon thereafter
( good thing about being on good terms with a pawn shop. theres LOADS of tools to borrow. as long as its nto the ONLY one avail. and ppl want it. theres 9 tap sets avail. found an electric start backpack blower i could use on a goped build. battery and flywheel maybe adds 1.5 lbs to it. whoppty doo. gearing and a good pipe takes care of that ;)/ my plans aside. any of yall have plans for minor thigns liek this?, anythign goes. links helpful . so we can drool along with you. i want to have motohuffy finished in time to hit the dragon. along wiht a few other motorised bicycles. or wouldnt mind taking a goped through it. had palns for this. except thief said i dont think so. :technical: ( i know where he lives and works. but me being the better man, shelved revenge plans indefinately
its chinese but heck. have access to parts. can goped this easily. but am broke so only dreaming lmao
http://www.ebay.com/itm/ScooterX-X-racer-49cc-Black-Gas-Powered-SX-13-/221046452054?pt=LH_DefaultDomain_0&hash=item3377652f56
damn i miss battlepig
(http://i519.photobucket.com/albums/u360/gstwin/ped3-1.jpg)
battlepiglet. my first goped hard tires no suspension. aka very non forgiving and wheelies w/o much help at all
damn they're expensive for a scooter :cookoo:
Quote from: codajastal on July 02, 2012, 09:40:02 PM
damn they're expensive for a scooter :cookoo:
theyre also not chinese. battlepiglet was a 1993 model on its original engine. battlepig was a 2004. i want to build another one. btu this oen will be theft proof.
a sport runs around 450 or so. a gsr sport 525ish, a gsr29/25 550, gsr40 closer to a thou. a gtr ( offroad 1100 or so) effin fun i tell ya. you ever visit me, ill have one built up and will elt you ride it. all you want. friggin addictive.
lol so much money for so little, but so little money for so much fun
DAMN i want this one. it is a roller. but found a 40cc electric start backpack blower engine almost a direct bolt on.
http://www.ebay.com/itm/GOPED-BIGFOOT-BIG-FOOT-SCOOTER-ROLLER-PARTS-NO-MOTOR-MOPED-/130721878204?pt=LH_DefaultDomain_0&hash=item1e6fa190bc
my body cannot handle a 3rd job. but goin for it anyways. friend who got severely crushed by her tow truck, is trying to get back to work. i forbid this. am working at her lot prepping cars for sale. also this 150cc chinese sit down scooter. converting to a standup. aka bypassing the moped/motorcycle law :cheers: got it to run day before yesterday. today after my second doc appt. going to put it up on rack and tune it up.
shaZam! i just had an idea to beat all of em. i get my hands on one of these again. 3-400 ish
take the 66cc engine i have for motohuffy., purchase a pullstart, rig a mount an mount said 66cc engine on Überbattlepig, pull start necessary because of the high compression. and the scoot cause of leg problems developing. i can ride this one legged if i have to. plus i have hte huiffy and the haro still if things improve with my feet
the pullstart http://www.ebay.com/itm/Alloy-Pull-Start-Starter-49cc-60cc-66cc-70cc-80cc-Motorized-Bicycle-silver-/140638308068?pt=LH_DefaultDomain_0&hash=item20beb246e4
Quote from: yamahonkawazuki on July 02, 2012, 10:10:37 PM
DAMN i want this one. it is a roller. but found a 40cc electric start backpack blower engine almost a direct bolt on.
http://www.ebay.com/itm/GOPED-BIGFOOT-BIG-FOOT-SCOOTER-ROLLER-PARTS-NO-MOTOR-MOPED-/130721878204?pt=LH_DefaultDomain_0&hash=item1e6fa190bc
:thumb:
Quote from: codajastal on July 02, 2012, 11:23:03 PM
Quote from: yamahonkawazuki on July 02, 2012, 10:10:37 PM
DAMN i want this one. it is a roller. but found a 40cc electric start backpack blower engine almost a direct bolt on.
http://www.ebay.com/itm/GOPED-BIGFOOT-BIG-FOOT-SCOOTER-ROLLER-PARTS-NO-MOTOR-MOPED-/130721878204?pt=LH_DefaultDomain_0&hash=item1e6fa190bc
:thumb:
sucks working in a pawn shop. although i dont have ot pay for tools needed, i find all sorts of shaZam! i could use in a project/s if i could save $500, i could damn near clean that place out lol. and fill my toolbox and spare engine stash lol
goped sport:
https://www.youtube.com/watch?v=lznz47q7taU
goped gsr25 ride to margaritaville. ( this was the one stolen lol)
https://www.youtube.com/watch?v=qFpKt_faQdY
gsr40 DAMN I WANT lololololol
https://www.youtube.com/watch?v=z8TgvmwQrAI
if i build another goped. i plan on making my own handlebars. using con rods and pistons from a gs. almost have my 13b clock finished lol
doc, and chiro want me off bike for a while. ( hips are messed up. xrays looked atrociousas did back) that aside. going to source a gsr goped rolling chassis and use the engine from motohuffy aka a 66cc goped. but am also setting it up so the engine can be swapped between the goped and the huffy in 45 minutes. but following docs orders atm. sourcing a goped rolling chassis atm. found a few. may just buy a frame and build it piece by piece
LMAO donut city
https://www.youtube.com/watch?v=IMPwlioIpyc&feature=related
my buy list if i build my own
frame: http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4666/.f
fork: http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4438/.f
wheels: http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.7680/.f
mainly only thing left is a handlebar setup. those are available used or from other goped parts suppliers
Quote from: yamahonkawazuki on July 03, 2012, 09:27:14 PM
LMAO donut city
https://www.youtube.com/watch?v=IMPwlioIpyc&feature=related
:))
(http://i519.photobucket.com/albums/u360/gstwin/Mobile%20Uploads/downsized_0831022017.jpg) not bolted in yet. have to go get some red locktite. ext on hte to do list. got tomorrow off,goign to drink a big margarita, and assemble it. will check assy. later on when sober. of course, and definately will NOT ride while not sober Eh?
Aaron
just realised will have to get some more chain. raising the engine up like this will render chain too short. no biggie. tractor supply,here i come lol. have a good chain breaker. and a set of starret puches i borrowed from pawn shop hteyve forgotten about, so i can finsih that assy. then return the set.
will have to flip head. no biggie. will take all of 5 minutes. copper gasket wont need replacement. but spark plug bumps frame as shown but flipped wil sit in between the two bars, to change plug will have tothread plug out between bars and replace same way.
(http://i519.photobucket.com/albums/u360/gstwin/Mobile%20Uploads/downsized_0831022312.jpg)
since my neuropathy has gotten somewhat severe, i borrowed the funds from friend & shop owner to get this while i set up motohuffy.
(http://i519.photobucket.com/albums/u360/gstwin/resource.jpg)
a friend of mine offered to trade me a 50cc honda spree type scoot. i could transform into a standup bypassing licensing laws. but since the engine on motohuffy is a gift, it is bad form to trade or sell gifts. my grandmother is oldmoney type person and rased to do things properly ansd with respect. so ill have to respectfully decline the trade offer.
need to purchase a small set of tools to finish the job. most i was using were borrowed from work stock. need to get a set i can keep. also need a few thngs for the standup scoot.;
http://www.ebay.com/itm/Scooter-33cc-43cc-49cc-Performance-Exhaust-Engine-Parts-/180518261049
http://www.ebay.com/itm/Silencer-Pitts-Muffler-Exhaust-Pipe-26-30cc-40cc-45cc-50cc-RC-Engine-/220834868411?pt=UK_ToysGames_RadioControlled_JN&var=&hash=item336ac8acbb need suggestions on a pipe for this scoot. the scoot is rideable but its standard pipe and gearing act funny. need an expansion chamber style pipe for a 43 cc engine. any and all suggestions are welcome. i plan to tear into hte trans. to put a better gear in it. a higher tooth for more pulling power. but im stuck atm. ( no tools lol. ) but that will be solved, if anyone knows where to find parts lmk PLEASE, maker of scoot is motovox, model is mvx10
Quote from: yamahonkawazuki on June 29, 2012, 11:15:25 PM
yes being broke slows this shiite down a bit. but it keeps my mind on a level playing field/level plane. as far as pc build plans goes am going to go with this:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1970063&csid=_61 i can upgrade the cpu later on. which in itself isnt bad. the gpu needs help though. another hundred covers that. . now to gopeds:
http://www.goped.com/products/gsrsport/default.asp its a gsr40. the one stolen from me was a gsr25. which i built piece by piece. , now to motohuffy:
am getting my hands on a tap set at friends pawn shop tomorrow and will have block prepared soon thereafter
( good thing about being on good terms with a pawn shop. theres LOADS of tools to borrow. as long as its nto the ONLY one avail. and ppl want it. theres 9 tap sets avail. found an electric start backpack blower i could use on a goped build. battery and flywheel maybe adds 1.5 lbs to it. whoppty doo. gearing and a good pipe takes care of that ;)/ my plans aside. any of yall have plans for minor thigns liek this?, anythign goes. links helpful . so we can drool along with you. i want to have motohuffy finished in time to hit the dragon. along wiht a few other motorised bicycles. or wouldnt mind taking a goped through it. had palns for this. except thief said i dont think so. :technical: ( i know where he lives and works. but me being the better man, shelved revenge plans indefinately
EEEEWWWWW AMD - sorry, i used to work for intel, i have a natural disdain for AMD
but nice scooter!
ivwe had problems with intel. ( usingone now) always used amd. problems there too tbh but less of a problem issue there