cheapest gsr available. http://www.goped.com/products/GSRCruiser/default.asptime to start saving. so i can get doc off my back. he wants me off bikes for a while. ;) i can take engine off of bike, and install on this gsr with minimal fuss. aka 50-60+ mph. will make use of a fluid brake system. which i have left over from my svott waimea
Yam, just my SHO but maybe a few too many thread starts these days?
Quote from: noworries on July 09, 2012, 03:13:37 AM
Yam, just my SHO but maybe a few too many thread starts these days?
im sorry ive offended you. i wont start another thread. take are :thumb: this is however the odds and ends section. youve got 2 choices. you can either report it to mods/staff or ill just stop posting?, whichever works best for you :cry:
Quote from: yamahonkawazuki on July 09, 2012, 03:20:21 AM
Quote from: noworries on July 09, 2012, 03:13:37 AM
Yam, just my SHO but maybe a few too many thread starts these days?
im sorry ive offended you. i wont start another thread. take are :thumb: this is however the odds and ends section. youve got 2 choices. you can either report it to mods/staff or ill just stop posting?, whichever works best for you :cry:
Post whatever you want you whore, :flipoff:
I read all your posts :cheers:
boy wonder hs a beef with it though. so ill keep it down to a pm level. cant do much until econ sit. allows purchse that doc approves of. id better stop noworries will complain about that too
Quote from: yamahonkawazuki on July 09, 2012, 03:35:21 AM
boy wonder hs a beef with it though. so ill keep it down to a pm level. cant do much until econ sit. allows purchse that doc approves of. id better stop noworries will complain about that too
Sorry but I refuse to read this post (http://smileys.on-my-web.com/repository/Unhappy/mad-047.gif)
Quote from: codajastal on July 09, 2012, 03:40:04 AM
Quote from: yamahonkawazuki on July 09, 2012, 03:35:21 AM
boy wonder hs a beef with it though. so ill keep it down to a pm level. cant do much until econ sit. allows purchse that doc approves of. id better stop noworries will complain about that too
Sorry but I refuse to read this post (http://smileys.on-my-web.com/repository/Unhappy/mad-047.gif)
ok, im sorry. wont happen again
Quote from: noworries on July 09, 2012, 03:13:37 AM
Yam, just my SHO but maybe a few too many thread starts these days?
maybe just you SHO ( w/e that means) but am trinyg to get ideas on getting my ass backon the road. walking is out of question. doc has all but forbidden bicycle riding, aka severely limiting it . scooters however hes no qualms with.im here psoting ideas for wuggestions. so whats your suggestion?, i await your answer
SHO? Seriously Honest Opinion?
Nah, refers to my StupidHumbleOpinion, and - nah again - not offended, just seems that "half" the threads here these days start from your keyboard. ...have a think about it? It's all entirely up to you.
#5043
Keep posting as much as you want. :cheers:
Your endless rants (http://i1206.photobucket.com/albums/bb442/adidasguy/Videos/hissyfit.gif) , raves :thumb: and pusillanimous facts :bs: are great entertainment and a reason to keep reading.
Maybe just start fewer threads - like keep all goped in one thread rather than 45 or 50 of them :flipoff:
To those who do not appreciate your postings, either don't read them or.......
(http://i1206.photobucket.com/albums/bb442/adidasguy/Videos/image00666666.gif)
Quote from: adidasguy on July 09, 2012, 10:41:48 AM
#5043
Keep posting as much as you want. :cheers:
Maybe just start fewer threads - like keep all goped in one thread rather than 45 or 50 of them :flipoff:
I have no issue with post whores, but I do prefer to read threads that stay on topic. I'm also more apt to keep track of what's going on in each thread I'd there are fewer of them to flip to.
@ Yama: Post away, sir.
Oops, broke my own rule by continuing jacked thread conversation. :oops:
Not gopeds, but i've been itching to talk it up with ya on whats brewing with my mopeds! It has definitely become another addiction haha. Bought 2 more for super cheap. Got the 77 garelli ssxl (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-06-27_21-39-13_533.jpg), 80 garelli ssxl ltd (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/IMG_3636.jpg), and 96 kinetic tfr(the girlies) (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/IMG_3530.jpg)
the 77 garelli is out of control. Last part to find is a true vm20 mikuni carb. Then build, start and break it in. Here's the ridonkulous list of parts;
polini 70cc Matic Kit - Mild case match on transfers (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-06-09_19-16-29_559.jpg)
High comp head(stock head milled by Moped Factory)
Weakends 20mm Intake pipe for VM20
knock off vm20, with real one to come soon!
Weakends exhaust
BRN 2 shoe race clutch(hardest part to find, luckily i found this one, unused from an old garelli builder)
Running Minarelli V1 starter plate and clutch bell with garelli gear welded in
Mini clubman bars
Polini filter
Headlight grill
16" snowflake wheels(going to paint the stock spoke wheels black and keep for back up.)
stack 1 (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/IMG_3429.jpg) - stack 2 (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-06-21_18-51-30_782-1.jpg) - stack 3 (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-06-25_20-03-07_207.jpg) - NOS V1 bell, starter plate, and snap ring straight from Italy! (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-07-02_20-56-29_433.jpg)
The 80 garelli ltd is going to be kept stock for a while. Just needs a new set of tires a bit more cleaning and she'll be my more reliable shredped. Got a set of sava MC2's (https://www.treatland.tv/ProductDetails.asp?ProductCode=sava-MC2-16x2.25-tire) in the post now. The big scheme for this one is a nutter build to make it my noped. Using the kick start garelli team engine (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/v71pNx4u2nKc133604551137P5214.jpg) I snatched from Germany. Just need to find a fan, and fan shroud and i'll be in business. I was told by 1 person that this engine won't bolt to my ssxl's frame though.. Hoping i can make it work w/o modifying the ltd's engine mounts. We'll see once it gets over across the big pond. If it doesn't fit, I've found a 77 ssxl rolling chassis a few hours away.
Dropped the engine out of the kinetic last night. After pulling the head and cylinder and finding no air leaks to cause the low 100psi compression. I decided to go ahead and order a full rebuild kit. Got the engine out easy as cake last night(thanks youtube videos!) Going to start the rebuild tonight, just got to clean the liquid gasket (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-07-07_19-58-22_48.jpg) off the PO used :2guns:
Yeah! feels good to get it all out of my system haha. I wish we were closer yama, would definitely be down to chill, wrench, ride, and learn some of yer 2 stroke knowledge!! Find me a moped for cheap down there, and i'll make the trek!! Drove to Pittsburgh for the ltd, long haul.. Though I paid $120 for it with all original parts(oil injector, tool bag w/tools, mirror, buddy pegs) owners manual and it had the original 1980 title (http://i287.photobucket.com/albums/ll129/steezin_and_wheezin/2012-06-17_01-18-33_738.jpg) signed over into my name! First ped owner to even mention a title haha
Can't wait til yer smelling 2T smoke in the morning again! happy wrenching!!
Like I told you before YHKS, I thought those things were silly til I watched that vid of angry bees! heheh Post on, good sir!
Great yellow snow gif adidas! (http://www.motohouston.com/forums/images/smilies/laughing6.gif)
Didn't this thread just go entirely off topic because of the people staying to stay on topic? or is that just me...?
so what do you have to work with? i think gopeds (or mopeds, same thing, right?) are great for cities, but i live in the country and cant safely go anywhere.
ever think about a motor-scooter? (the stand up kind) i clocked mine in at 36 MPH (viper with racing pipe + K&N intake) with police radar. they make seats for em to if you dont like to stand up.
idk. but am not posting anymor eabout it. seems to have ruffled 1 feather. which is one too many. legs gave out today while @ work. so am reporposing an electric wheelchair until i get back on feet. and other swho are complaining. if i put all of my threads on 1 thread, would be HARD to read, because it would be one thread with 15 topics. so ill keep quiet for a bit. to keep em happy :thumb: :cheers:
Quote from: yamahonkawazuki on July 09, 2012, 11:40:04 PM
idk. but am not posting anymor eabout it. seems to have ruffled 1 feather. which is one too many. legs gave out today while @ work. so am reporposing an electric wheelchair until i get back on feet. and other swho are complaining. if i put all of my threads on 1 thread, would be HARD to read, because it would be one thread with 15 topics. so ill keep quiet for a bit. to keep em happy :thumb: :cheers:
I'm not sure there are many others around here who would keep quiet because they ruffled a single feather (read the watch for animals thread (http://gstwins.com/gsboard/index.php?topic=61043.0) for evidence)...so, why should you? :icon_twisted:
What's theis "ruffled feathers" krap? Just suggested to Yam he think about the number of new threads he's been posting. Man up.
Quote from: noworries on July 10, 2012, 03:19:54 PM
What's theis "ruffled feathers" krap? Just suggested to Yam he think about the number of new threads he's been posting. Man up.
And apparently you are the only one concerned enough to call him out on it. So, the way I see it, you're the one with panties in a bunch.
Thought about it.........and still dont care how many :icon_lol:
Post away Yam. The rest of us don't start many threads in this section. Someone has to.
We could talk about yard moles, pets running loose, or birds nests in helmets... But I like gopeds.
Yeah, gopeds it is Keep posting. Im reading.
Quote from: noworries on July 09, 2012, 03:13:37 AM
Yam, just my SHO but maybe a few too many thread starts these days?
just for you noworries
http://www.youtube.com/watch?v=SOVgOGSH-r4
http://www.youtube.com/watch?v=RlIMZISxdQc&feature=related
Quote from: yamahonkawazuki on July 11, 2012, 01:48:11 AM
Quote from: noworries on July 09, 2012, 03:13:37 AM
Yam, just my SHO but maybe a few too many thread starts these days?
just for you noworries
http://www.youtube.com/watch?v=SOVgOGSH-r4
http://www.youtube.com/watch?v=RlIMZISxdQc&feature=related
Fake. No way a trans am just got beat by a goped.
Quote from: jestercinti on July 11, 2012, 04:41:11 AM
Fake. No way a trans am just got beat by a goped.
Unless the trans am was only running on 2 cylinders.
Quote from: yamahonkawazuki on July 09, 2012, 11:40:04 PM
idk. but am not posting anymor eabout it. seems to have ruffled 1 feather. which is one too many. legs gave out today while @ work. so am reporposing an electric wheelchair until i get back on feet. and other swho are complaining. if i put all of my threads on 1 thread, would be HARD to read, because it would be one thread with 15 topics. so ill keep quiet for a bit. to keep em happy :thumb: :cheers:
I was actually going there next, a guy that lives near me has a little electric chair and his goes about 25 (not sure top speed but he does the speed limit around my house, i followed him one day XD) Personally i enjoy your threads, anything mechanical sounds like fun to me.
and sorry to hear about that, any sustaining injuries?
Quote from: yamahonkawazuki on July 11, 2012, 01:48:11 AM
Quote from: noworries on July 09, 2012, 03:13:37 AM
Yam, just my SHO but maybe a few too many thread starts these days?
just for you noworries
http://www.youtube.com/watch?v=SOVgOGSH-r4
http://www.youtube.com/watch?v=RlIMZISxdQc&feature=related
hahahahahhahahahaha nnniiiiccceeee!!! i dont have any good straight stretches, i just got to radar myself while cruising some neighborhoods
Yam, you need this. Talk to Jason. Sellin' stuff is his game.
http://cincinnati.craigslist.org/mcy/3124899357.html
Quote from: jestercinti on July 11, 2012, 04:41:11 AM
Fake. No way a trans am just got beat by a goped.
thats what i said. no way in hell a WS6 got beat by a goped even with a skopod60 race engine its not possible
Quote from: jestercinti on July 11, 2012, 06:34:37 PM
Yam, you need this. Talk to Jason. Sellin' stuff is his game.
http://cincinnati.craigslist.org/mcy/3124899357.html
shaZam! i wish. dont have the $ to spare atm. almos tlooks like a goped engine. ( i see a spindle drive there. )
found this locally for 300 on cl
(http://images.craigslist.org/5L75I65F73E53Fb3Jcc7ae118cd44df011cd6.jpg) idk if worth it but maybe could sell parts off to recoup $$ but dont have 300 so jus dreaming lmfao
dammit anothjer one here in ktown same price lol ahh well i can always drool
(http://images.craigslist.org/5L35Fb5J73na3Gd3Fdc6b337e635031aa1d27.jpg)
#5059
I actually saw some for sale in Seattle.
Used one $250 obo.
One for $799! WOW! I could have had a GS!
http://seattle.craigslist.org/search/mcy?query=goped&srchType=T&minAsk=&maxAsk=&hasPic=1
Quote from: adidasguy on July 11, 2012, 11:48:11 PM
#5059
I actually saw some for sale in Seattle.
Used one $250 obo.
One for $799! WOW! I could have had a GS!
http://seattle.craigslist.org/search/mcy?query=goped&srchType=T&minAsk=&maxAsk=&hasPic=1
799 is near retail. unless heavily modified = $$$. sports around 500, gsr25-29r 550-600 etc. NEW GTR the offroad one. ( damn i want) are over a thou new. id just like to find a frame. even those are not cheap lol. i love em cause if i wished, lol i could do 20 on sidewalk and not go to jail. same as motohuffy. the disc brakes on some of the peds are NICE though. scruubs off alot of the speed quickly
#5060
Over $1000 retail for that one.
FS: GoPed GTR46i Trail Ripper Scooter, Sinister Black, Like New - $799 (Lake Stevens, WA)
Date: 2012-07-08, 2:40PM PDT
Reply to: sfsgt-3126762160@sale.craigslist.org [Errors when replying to ads?]
I'm selling my Goped GTR46i Interceptor Gas-powered, 2-stroke, Stand-up Scooter. It is gently used, and still like new.
Only used on the street, not off road and never jumped.? Still has the nobbies on the tires.? Less than 1 tank of gas used- so the motor is just barely broken in for you to use this summer!
ASKING PRICE: $799.00, OBO
Call or text: (four two five) three three four - zero eight four eight
Link to Details from Manufacturer: http://www.goped.com/products/GTR46i/default.asp
Link to a new one for sale online: http://www.amazon.com/GoPed-GTR-Interceptor-Sinister-Black/dp/B004O4FOCC
What the Manufacturer says about this Goped:
Introducing the GTR46-Interceptor (GTR46i) Following the very successful introduction and incredible growth of the CIDLI suspension equipped Go-Peds (Go-Ped Trail Ripper, Riot and Trail Ripper Quad), PMW is proud to continue extending this great line by reintroducing the legendary Go-Ped "Interceptor" as the new GTR46i. This very high performance Go-Ped has the same impressive chassis with high performance "Interceptor" components as its amazing older brothers , but with the following variations: New quieter exhaust system Smooth ride AT Primo Duro Trap Tire that offers great trail riding, which comes stock on the Interceptor." Higher speed, better fuel economy, quieter GSR46R 6-76 sprocket drive ratio New kickstand These modifications make the GTR46i perfect for those that want to experience the fully suspended plush ride on trails and unpaved surfaces that comes only from the race proven and patented CIDLI suspension system. This powerful scooter will please even the heaviest of Go-Ped riders that understand the requirements of an adjustable/tunable racing style engine and carburetor.The GTR46i is now available at the same price as the off road GTR46R, and in the same popular chassis color "Synister Black".
(http://images.craigslist.org/5G25Mb5Jf3G33Le3F6c783dc7858bbca51bb9.jpg)
(http://images.craigslist.org/5L55U05J43E23Mf3N5c784af3a58102fa1378.jpg)
in that case that is a gtr that is a good price. high but good. been cravin one of those damned things. but they dont exist around here
drooling heavy on that gtr lol
See gopeds are an addiction for some. some get whatever model. and say ok i went 25, now i want to hit 30, then 40 then 50 etc. while some, like myself. want to be able to go fast, but dont really care. for me 25 was fast enough. i hit 30 once and it scared me shitless
(http://i519.photobucket.com/albums/u360/gstwin/downsized_03200223431.jpg)
this was really the only mod i made to my gsr25 beside the 98 tooth sprocket. which would have slowed me down. but this pipe and that gear allowed me to climb hills and gain a few mph. to 28-30