So.. i went to both bikebandit.com and bikecarbparts...
looked up what the wiki says for drop in, stock exhaust:
pilot, 20 (n224.103)
mid 62.5 (n102.221)
main 137.5
but... nowhere seems to have the mikuni in 62.5 . only 60 or 65.
now what?
Maybe Buddha still has some.
Or, drill out a 60 with a #72 drill bit (equal to about a 63.5)
Did you check on Sudco's site? They are the North American Mikuni dealer.
You can still get them mate, http://www.ebay.com/itm/150637795093 (http://www.ebay.com/itm/150637795093)
I bought mine from Niche Cycle Supply without issue :)
Local dealer has them available online:
http://www.state8.com/Mikuni-MAIN-JETS-detail.htm?productId=10506812&ez=&pos=10
Quote from: mitch79 on August 20, 2012, 10:45:31 PM
You can still get them mate, http://www.ebay.com/itm/150637795093 (http://www.ebay.com/itm/150637795093)
I bought mine from Niche Cycle Supply without issue :)
Niche Supply is a good supplier through Ebay. I'd recommend them.
jetsrus.com usually has everything both true mikuni and knock off. i've ordered through them and haven't had a single problem
here's the small mains:
http://jetsrus.com/a_jets_by_carburetor_type/jets_mikuni_N102-221_main_Small_round.htm
I have not found 62.5 in years. However I also dont think they are neccesary, washer up the needle and you're OK.
Cool.
Buddha.