Nothing wrong with these other than the scratches on the one. But I took these off and put a set of OEMs on after I powder coated them gloss black. These have the bolts but need replacement rubber bushings.
$15 shipped
Here is a set on eBay
http://www.ebay.com/itm/CARBON-FIBRE-INSET-BAR-END-ENDS-WEIGHTS-BLUE-22mm-7-8-/320507157367?pt=UK_Motorcycle_Parts&hash=item4a9fb71b77
(https://vxpcsg.bay.livefilestore.com/y1p9QW_V3YjyKvUjQz77el3rQF8c4NRM4oWisxisYthSx4TbCks0UDXhq3Akw3EkxvymHWYXXjKIwn9v4mVVGre3MEKjoAlamW9/2012-08-30_20-48-29_594.jpg?psid=1)
(https://vxpcsg.bay.livefilestore.com/y1p9QW_V3YjyKuDV3VWY85q4tBE4EPrd4h8eQGnNNjpbMjDn_cJVkevW-s59FtPD7V-IW3mHqBkSuceHJY5VWl7JHZ5ekOMFSzj/2012-08-30_20-48-24_489.jpg?psid=1)
~~SOLD~~
Where do you get replacement rubber bushings for these?
If you need rubber bushings,
1. use the ones from your existing bars
2. Order them - it is a current Suzuki part.
3. Make rubber bushings from a stack of faucet rubber washers.
You'll need longer bolt. Right end nut actually works and has a knurled face. The left (inner) nut is large and acts just as a spacer - it doesn't thread on.
For reference:
(http://i1206.photobucket.com/albums/bb442/adidasguy/GS500/IMGP0982a.jpg)
Good pic.
If it were me, I would just order new and non abused ones. Not like they cost much.
If these were not scratched I would be all over them.
Yeah but you would be really late. These sold long ago ;)