Print Page - I need of numbers

Title: I need of numbers
Post by: Blueknyt on December 23, 2003, 06:40:32 PM

Ok, i dont have a book right now, but i am in need of torque specs for the big and small Main Case bolts. the ones that hold the top to bottom. i also need Valve clearance specs. i have 2 days to get everything back together and working. :o Thanks in advance.

Title: I need of numbers
Post by: Bob Broussard on December 23, 2003, 08:08:38 PM

1-8 main bolts 9.5 ft lbs initial, 17.5 final
Counterbalancer bolts #9-11, 4.5 initial, 9.5 final
Other 6mm bolts, 4.5 initial, 7.0 final
Other 8mm bolts, 9.5 initial, 14.5 final
Cylinder head nuts, 25.5-29.0 ft lbs
Cam bearing caps, 6.0-8.5 ft lbs
Valve clearence 0.03-0.08mm (0.001-0.003 in)

Title: I need of numbers
Post by: Blueknyt on December 23, 2003, 08:10:47 PM

Double B, Your Da Man, ( :kiss: :kiss: :kiss: ) bless ya lad ;)

Title: I need of numbers
Post by: JLKasper on December 24, 2003, 06:31:48 AM

Best of luck to ya! :cheers:

Title: I need of numbers
Post by: Blueknyt on December 24, 2003, 02:05:45 PM

Wait, are you sure, those numbers are Foot pounds? and not newton meters? or Inch pounds? seems kinda weak. between 7-20 footlbs over all. and all i have is Footlbs torque wrench.

Title: I need of numbers
Post by: Bob Broussard on December 24, 2003, 03:01:47 PM

Yes they are Ft Lbs.
You have to be gentle with the small torque numbers to feel when it clicks on my torque wrench.

Title: I need of numbers
Post by: Blueknyt on December 24, 2003, 07:03:28 PM

Yup broke 2, # 11, and the one just south of 6, welp, hope it holds for 2 months, aint got any choice right now. Im gonna start preping the other bottom ends now. If anyone has top ends, IE cylenders to heads they wish to ditch cheap, let me know.

Title: I need of numbers
Post by: Blueknyt on December 24, 2003, 07:49:24 PM

need stock pistons too

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: Blueknyt on December 23, 2003, 06:40:32 PM