Print Page - gs96 project ( Brasil User )

Title: gs96 project ( Brasil User )
Post by: vaz on October 10, 2012, 07:27:25 PM

HELLO, MY NAME IS FELIPE AM FROM BRAZIL

THAT is REFORM AND TRANSFORMATION OF MY GS500 1996

REPLACING A GENERAL REPAIRS MADE, ALL BOLTS, OIL SEALS AND ALL PARTS.

Parts List

tail made of fiberglass
140 rear tire
4 damper elongated cm
panel (xr250)
Front headlight (fazer250 yamaha)
tail light (yamaha YBR125)
Fuel tap new original
repairs in the clutch
paint entire bike

I hope you enjoyed, still have some things I want to change, but I'm doing slowly ...

before
http://www.flickr.com/photos/87787367@N05/8035892505/lightbox/

during
http://www.flickr.com/photos/87787367@N05/8035894878/lightbox/

http://www.flickr.com/photos/87787367@N05/8035893326/lightbox/

after

http://www.flickr.com/photos/87787367@N05/8047344800/lightbox/

http://www.flickr.com/photos/87787367@N05/8047340233/lightbox/

http://www.flickr.com/photos/87787367@N05/8047345308/lightbox/

http://www.flickr.com/photos/87787367@N05/8047345668/lightbox/

http://www.flickr.com/photos/87787367@N05/8047341151/lightbox/

http://www.flickr.com/photos/87787367@N05/8047346034/lightbox/

Title: Re: gs96 project ( Brasil User )
Post by: mikeybikey82 on October 10, 2012, 07:44:40 PM

damn man thats a pretty bike. good job
mikey

Title: Re: gs96 project ( Brasil User )
Post by: adidasguy on October 10, 2012, 10:34:03 PM

What did you use for the gauges?

Interesting that the adjustable fork caps were not sold in the USA but seem to show up in the rest of the world.

Title: Re: gs96 project ( Brasil User )
Post by: vaz on October 11, 2012, 05:00:37 AM

This gauge is a bike of honda xr250 tornado model
http://images01.olx.com.br/ui/3/74/41/56247341_1.jpg

Indeed, the forks of the American motorcycles are different!

and now I'm looking for these products in Brazil, but it is hard to find around here.

http://www.ebay.com/itm/7-8-Red-Universal-Left-Right-Front-Brake-Master-Cylinder-Adjustable-Levers-/261105154551?pt=AU_Motorcycle_Parts_Accessories&hash=item3ccb1479f7&vxp=mtr

http://www.ebay.com/itm/Billet-Keyless-Fuel-Gas-Cap-Suzuki-SV-650-S-99-00-01-02-TL1000-R-S-98-02-/300726050308?pt=Motorcycles_Parts_Accessories&hash=item4604ab5e04&vxp=mtr

Title: Re: gs96 project ( Brasil User )
Post by: seamax on October 11, 2012, 07:31:07 AM

That is a very nice tail and panel. The best I've seen so far that still follows the GS frame line and still let's you ride 2 up.

Can you tell us exactly what year xr250 that panel came from and what tail that came off of?

Great looking bike! The best designs are the ones that make the bike look beuatiful as if it was originally built that way. :thumb:

Title: Re: gs96 project ( Brasil User )
Post by: Higgins13 on October 11, 2012, 07:36:11 AM

I like the headlight

Title: Re: gs96 project ( Brasil User )
Post by: vaz on October 11, 2012, 07:41:00 AM

Thanks, I tried to make it more current, as if it were made today.

This panel is the Brazilian xr250 it was manufactured here from 2002 to 2010. The tail was made to specify it in fiberglass fittings are perfect, without the need to cut the anchors of the bike, recalling the design of the r1, a guy here in the state of São Paulo in Brazil has done for me.

the taillight used a Yamaha YBR 125, and the headlight of a used yamaha Fazer 250.

I hope you enjoyed!

Title: Re: gs96 project ( Brasil User )
Post by: average on October 13, 2012, 03:47:08 PM

The black side panels are the bee's knees! They are slick! Those would fit my bike perfectly....

Title: Re: gs96 project ( Brasil User )
Post by: Doidera on October 19, 2012, 06:54:41 PM

Nice motorcycle man !!!
é nois que ta

Brasil Represents ! O0
gs500online.com

GStwin.com GS500 Message Forum

Main Area => Projects / Builds, Racing and Tech => Topic started by: vaz on October 10, 2012, 07:27:25 PM