GStwin.com GS500 Message Forum

Main Area => For Sale / For Trade / Wanted / Hot Deals => Topic started by: tire guy on October 11, 2012, 06:09:23 AM

Title: 2004 gs 500 part out
Post by: tire guy on October 11, 2012, 06:09:23 AM
I have a 04 gs500 with a blow cylinder that I've decided to part out. The fairing were painted flat black ; 
Upper fairing 50.00 sold
Upper bracket 70.00 sold
Headlight 75.00 sold
Speed odometer gauges 75.00
Handlebars 50.00
Ignition key switch set 70.00
Forks 150.00
Triple clamps 50.00
Front wheel 100.00
Fender 25.00 sold
Axle 10.00
Fuel tank 75.00 sold
Handle bar switches 25.00 each
Speed odometers Gauges 85.00
Front master cylinder 35.00
Levers 10.00
Driver foot rest 40.00 each
Passenger rest 25.00 each
Seat 50.00 both sold
Swing arm 50.00
Rear wheel 75.00
Tail light 30.00
Wire harness 50.00
Carbs 100.00
Air Box 25.00
1 cylinder head 50.00 sold!!!!
Bottom cases complete 100.00
Chain sprockets 40.00
Tail fairings 50.00 sold
PayPal accepted
Email for pics mtxtyres@yahoo.com

I just cleaned up and I found the lowers for it.75.00 each They are painted flat black just as the rest of the bike.. Email me for pics the don't have any cracks
Title: Re: 2004 gs 500 part out
Post by: weedahoe on October 11, 2012, 08:29:04 AM
Where are you located? Any pics of the bike?
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 11, 2012, 08:57:43 AM
im located in louisiana but i listed if you neede pics i can email pics just email mtxtyres@yahoo.com thanks 
Title: Re: 2004 gs 500 part out
Post by: weedahoe on October 11, 2012, 09:05:21 AM
Tank have any dents?

Might be easier to post pics here rather than email to someone everytime they want to see something.

Also, you have the gauges listed 2x with 2 different prices? Got two sets? What's the mileage on them? Are all of the indicator lens with them?
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 11, 2012, 04:31:08 PM
no dents in the tank all the lights are in place and i only have one 75.00 for the gauges.
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 11, 2012, 04:34:40 PM
gauges have 17k on em
Title: Re: 2004 gs 500 part out
Post by: GI_JO_NATHAN on October 11, 2012, 05:05:19 PM
Quote from: tire guy on October 11, 2012, 04:31:08 PM
...and i only have one 75.00 for the gauges.
Quote from: tire guy on October 11, 2012, 06:09:23 AM
I have a 04 gs500 with a blow cylinder that I've deduced to part out. The fairing were painted flat black ; 
Upper fairing 50.00
Upper bracket 70.00
Headlight 75.00
Speed odometer gauges 75.00
Handlebars 50.00
Ignition key switch set 70.00
Forks 150.00
Triple clamps 50.00
Front wheel 100.00
Fender 25.00
Axle 10.00
Fuel tank 75.00
Handle bar switches 25.00 each
Speed odometers Gauges 85.00
Front master cylinder 35.00
Levers 10.00
Driver foot rest 40.00 each
Passenger rest 25.00 each
Seat 50.00
Swing arm 50.00
Rear wheel 75.00
Tail light 30.00
Wire harness 50.00
Carbs 100.00
Air Box 25.00
1 cylinder head 50.00
Bottom cases complete 100.00
Chain sprockets 40.00
Tail fairings 50.00
PayPal accepted
Email for pics mtxtyres@yahoo.com
Title: Re: 2004 gs 500 part out
Post by: crzydood17 on October 12, 2012, 02:25:02 PM
seat 85.00 mint
seat 50.00 with damage


clearly there are 2 seats... 1 must be crappy...
Title: 2004 gs 500 part out
Post by: cbcanada on October 12, 2012, 05:15:45 PM
would this tank fit on a 99 500e?
Title: Re: 2004 gs 500 part out
Post by: friendlyfire01 on October 13, 2012, 01:05:20 PM
I'll take the left indicator hand control. also the handlebars.
Title: Re: 2004 gs 500 part out
Post by: weedahoe on October 13, 2012, 02:58:18 PM
I never did get pics on the tank but im also looking for another set of complete end bar weights (weights, screws and rubber). They fit in a small USPS Flat rate box btw ;)
Title: Re: 2004 gs 500 part out
Post by: gsatterw on October 15, 2012, 07:09:26 PM
pm'd on the head
Title: Re: 2004 gs 500 part out
Post by: gsatterw on October 16, 2012, 12:01:40 PM
Picked up the head from him directly today, really nice guy, reputable bike shop
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 16, 2012, 02:48:53 PM
Glad i was able help gsatter . He was a very nice guy that i would do business with him again.
Title: Re: 2004 gs 500 part out
Post by: KatCycle on October 18, 2012, 10:10:09 AM
Would you by chance have a good crank?
Title: Re: 2004 gs 500 part out
Post by: Twinrider on October 20, 2012, 12:51:06 PM
Is the front brake lever adjustable? If so I'll take it.
Title: Re: 2004 gs 500 part out
Post by: Tyler.M on October 22, 2012, 05:01:20 PM
email sent.
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 23, 2012, 04:11:56 PM
email replyed with pics
Title: Re: 2004 gs 500 part out
Post by: Funderb on October 23, 2012, 05:54:02 PM
you should reach out to PatheticPuma about the gauge cluster, he's in need of one. His post is at the top of the project right now i think.
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 23, 2012, 06:08:38 PM
I check but I didn't c anyone by that name.. Have him send me a message or email at mtxtyres@yahoo.com
Title: Re: 2004 gs 500 part out
Post by: Funderb on October 23, 2012, 06:15:24 PM
I'll post the link to this topic in his post. he's trying to source a set locally, but you might be his best option if that falls through.
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 23, 2012, 06:17:05 PM
Ok thanks
Title: Re: 2004 gs 500 part out
Post by: Johnny.Bonecracker on October 25, 2012, 03:16:14 AM
You identify an Upper fairing, but do not mention Lower fairings being for sale. I'm curious if your bike is a fully faired model or one that had an upper fairing/cowling for a round headlight which may have also had a separate belly pan/lower fairing.

I don't know if you had received my E-mail query that I had sent prior to my GSTwins account being approved. The Subject line should have mentioned a 2003 GS500E conversion project.

I can resend it if required as I am looking at multiple parts that you had listed, as well as the availability of a few parts you had not listed.
Title: Re: 2004 gs 500 part out
Post by: gsatterw on October 25, 2012, 09:05:01 AM
It is an 04, but the lower fairing has been removed. The headlight is the 04+ type.

Also, there was no GS500 made in 03. 89-00 models (E), 01-02 (no letter), 04+ (F)
Title: Re: 2004 gs 500 part out
Post by: Johnny.Bonecracker on October 25, 2012, 11:48:29 AM
There was no 2003 model made in the United States, perhaps.  But the naked 500 (aka 500E) WAS produced in 2003 in Canada.

I like the raptor design of the upper fairing from the 2004 models-forward (500F - that looks similar to the GSX-R models) which is significantly more aggressive than the round headlight on the naked (500E) design, but I don't want the complete fairing look.

I just wanted to make sure which fairing was in question.
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 26, 2012, 02:30:56 PM
i have the diamond shape fairing and headlight which is the newer model. email me for pics mtxtyres@yahoo.com
Title: Re: 2004 gs 500 part out
Post by: tire guy on October 26, 2012, 02:36:44 PM
i found the lower fairings for bike a few days ago..  email me for pics mtxtyres@yahoo.com
Title: Re: 2004 gs 500 part out
Post by: tire guy on November 18, 2012, 09:55:44 AM
bump!!!!!!! still have a lot good parts available guys......
Title: Re: 2004 gs 500 part out
Post by: dsgs500f on November 30, 2012, 01:09:37 PM
Do you have the speedometer cable?
Title: Re: 2004 gs 500 part out
Post by: willi777 on December 27, 2012, 05:32:21 AM
Sent an e-mail, but haven't heard back- looking for swing arm pivot bolt and nut with shipping to 11946... Thanks
Title: Re: 2004 gs 500 part out
Post by: PatheticPuma on December 27, 2012, 09:04:57 PM
Quote from: Funderb on October 23, 2012, 05:54:02 PM
you should reach out to PatheticPuma about the gauge cluster, he's in need of one. His post is at the top of the project right now i think.

It's been a couple months, but thanks for thinking of me haha. Still looking, but with my daughter being born needing medical attention money is tight
Title: Re: 2004 gs 500 part out
Post by: willi777 on December 27, 2012, 10:36:12 PM
Found a swingarm pivot bolt...Thanks
Title: Re: 2004 gs 500 part out
Post by: mustangGT90210 on December 28, 2012, 10:06:56 AM
Tire Guy,

Do you still have the fork brace and bolts to attach it to the forks? I'm looking for one
Title: Re: 2004 gs 500 part out
Post by: weedahoe on December 28, 2012, 10:09:03 AM
Anyone else noticed Tire Guy hasn't been here for almost a month..............
Title: Re: 2004 gs 500 part out
Post by: mustangGT90210 on December 28, 2012, 10:17:41 AM
Nope :P

Title: Re: 2004 gs 500 part out
Post by: tire guy on January 13, 2013, 01:31:25 PM
hey guys im back just been busy with end of the year stuff at work.... fyi a lot parts still available....
Title: Re: 2004 gs 500 part out
Post by: crzydood17 on January 14, 2013, 08:42:49 AM
are the fairings in good condition?
Title: Re: 2004 gs 500 part out
Post by: tire guy on January 14, 2013, 02:06:36 PM
sorry fairings are sold...
Title: Re: 2004 gs 500 part out
Post by: Zethioth on January 15, 2013, 07:23:39 PM
Are you parting out the engine?
Title: Re: 2004 gs 500 part out
Post by: weedahoe on February 19, 2013, 08:28:46 PM
I received a recent PM about a member not getting the items paid for.

After checking the email address of mtxtyres@yahoo.com on Google it seems there have been other issues in the past. This cannot and will not be tolerated. I am locking this thread. Before any other transactions take place, please correct any misunderstandings, miscommunications or anything not shipped and delivered.