But selling all the same haha
All parts are '96 ZX7R
17X3.5 DID front wheel
17X6.0 DID rear wheel
320mm front rotors
Swignarm
Shock
Showa Inverted Forks
Triple clamps
Rear caliper and bracket
Rear rotor is buggered up, and the forks will need to be re-sealed.
Asking $550 shipped to your closest FedEx freight dock.
http://i.imgur.com/3YUb9.jpg
The front end assembly is an easy setup on the GS. If anyone is interested I'll split it up to sell that. Front wheel matches the GS.
Very interested. Does the swingarm drop right in or does it need some work?
Also, any more pics?
I can get specific pictures of any bits you'd like to see.
I can't remember the width of the stock GS swingarm. I used a ZX9R swingarm on mine but I had to have the ends of the pivot milled down and a sleeve cut to fit the inside of the pivot...but I wanted to use the GS pivot bolt as opposed to cutting the frame for the ZX bolt. You're looking at another $100 or so worth of machine shop work if you don't have connections.
And correction...they are KYB forks. Not Showa.