Everything was going great on the rebuild until I dug deeper into the motor to find a broken con rod and damaged crank so financially it won't be worth it to rebuild but that means good parts for everyone else. Everything in the pictures are up for grabs so if its not listed please ask.
(http://i805.photobucket.com/albums/yy339/milezero5/image.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/image-2.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/image-3.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/image-4.jpg)
(http://i805.photobucket.com/albums/yy339/milezero5/image-1.jpg)
R6 shock with needed spacer and bolt 60
Front shocks with progressive springs, new Suzuki fork oil, and new fork seals 150
2003 sv650 caliper with good Oem pads 30
New ebay clips ons with new grips 60
Upper triple clamp with ignition and key 20
Front wheel with new Avon road rider tire 125
Rear wheel with new Kenda cruiser st tire 120
Rear caliper with new pads and ss line SOLD
eBay foot pegs with bracket SOLD
New jt front sprocket 16 tooth SOLD
New bike master chain SOLD
Clutch basket with new ebc clutch and springs 70
Clutch cover and new gasket 30
Valve cover with new gasket 30
Frame make offer
Wire harness SOLD
Vance and Hines full exhaust (sandblasted ready for paint) SOLD
Hi there
I have messaged you back re the R6 shock. Just need to know cost of freighting it.
Cheers
Andrew
Ive got those same bars and really like them
What is the size of the front springs?
If your talking about the spring rate, honestly not sure since they are a "progressive style spring". It's a lot firmer than stock but a bit softer than race tech. If its actual length they are the same length as the stock springs.
Quote from: milezero5 on November 15, 2012, 03:23:27 PM
If your talking about the spring rate, honestly not sure since they are a "progressive style spring". It's a lot firmer than stock but a bit softer than race tech. If its actual length they are the same length as the stock springs.
I assumed they were Progessive the brand. And by size I mean the "rate" or measurement (0.80, 0.90)
I believe .80 there was only available when ordering
A bit to lite for my "full" figure I am afraid :)
Thanks
Got any pics of the V&H?
PMd
How much for a bucket of pickles?
2 dollars for the pickle bucket lol firehouse subs sells them
Sorry if im a bit slow on responses holidays are nuts
I just took a pic of the exhaust ill post in a when i get home
how much for the oil pan
Where are you located? got a tank?
Wes2001 "MIGHT" need the oil pan "gasket" if its still available and if he doesnt already have one ordered.
Just giving a guy a heads up incase he didnt know that replacing the oil pan gasket is a MUST when dropping the pan.
How much for just the progressive springs? I don't need the forks, I can send you my old springs to complete yours again.
how much for the oil pan gasket
You need to buy and use a new one
i know i need a new one. dont usee the one in the pic thts still in the bag. but there only 9 bucks at the local store so ijust got 1 there
Do you have the fork brace and 4 bolts that go with it? Mine is bent so I'm running no fender because it rubs the tire
Looking for the swingarm pivot bolt and nut with shipping to Hampton Bays, NY 11946. Thanks and happy holidays.
Where are you located?
How much for the front tire and rim shipped to 48933?
I need a new tire. so figured I would ask..
I see a few things I would like but need to refrain myself now as I just got the bike.
Sorry for the late response been really busy i will get back to everyone now that the holdiays are basically over and i have some more free time
I do have a swingarm pivot bolt
are you talking about the really long main one
Fork brace is gone
I will get shipping for the wheel tire
And ill check for the oil pan gaskets( all ones i have are new unopened)
QuoteI do have a swingarm pivot bolt
are you talking about the really long main one
Yes, that's the one :)
Do you still ave the clip-ons?
did you ever install them on the bike?
I do have the clip ons. They were installed and then taken right back off as the project was never finished. So they are still new with 0 miles on them
Tell me a little more about the chain (I need a new one). Is it an o-Ring chain? Is there a master link? How many links? GS500 uses a 525/110.
Chain is currently pending to another member
It's a oring, oem length which has a master link as well
Ok, PM me if it becomes available. Thanks.
Bump
Make me offers
I got the chain, sprockets, and rotor. Thanks for the great deal! :thumb:
How much for the clip ons?
A lot of stuff gone, bunch of good stuff left
Pm sent on clip ons