Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: paradoqs on December 30, 2012, 09:01:54 PM

Title: Installing my headlight
Post by: paradoqs on December 30, 2012, 09:01:54 PM
So, I have an H4 bulb and I have two black, two yellow, and one white wire (I think). What goes where?
Title: Re: Installing my headlight
Post by: weedahoe on December 30, 2012, 10:59:51 PM
What headlight are you installing?
Title: Re: Installing my headlight
Post by: paradoqs on December 31, 2012, 10:06:32 AM
Its a universal one with an H4 bulb. Round, 7 inch. Says "Xanadu" on it.
Title: Re: Installing my headlight
Post by: weedahoe on December 31, 2012, 11:27:43 AM
Maybe a picture or link to what you have. Since it is universal, it won't wire up like normal color coded wires. Maybe take a battery and test each combination of wires to find which is (+) and which is ground
Title: Re: Installing my headlight
Post by: paradoqs on December 31, 2012, 02:13:56 PM
The wires are what is coming from the bike. I assumed it would be universal for the bike wires. Is black white and yellow not universal for the GS? The light just has the three H4 prongs.
Title: Re: Installing my headlight
Post by: adidasguy on December 31, 2012, 02:34:37 PM
All GS500's have a universal 3 prong plug 1989 to present. If the bike doesn't have that, then it has been modified and we need pictures.
Text only | Text with Images