Text only | Text with Images

GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: GSF500 on January 15, 2013, 01:19:29 PM

Title: pulse air system (pairs) ...??
Post by: GSF500 on January 15, 2013, 01:19:29 PM
I installed my K&N lunchbox filter and have the Pairs hose + vent hose disconnected. Should I modify the K&N to attach the hoses or put a breather filter on them?  What to do :dunno_black: Thanks  AGAIN>>>!!!
Title: Re: pulse air system (pairs) ...??
Post by: adidasguy on January 15, 2013, 01:22:06 PM
Most of us remove the PAIR system. If not required in your state (i.e. no emissions testing) then get a pair of block-off plates and remove it.
Title: Re: pulse air system (pairs) ...??
Post by: jestercinti on January 15, 2013, 01:33:29 PM
The Pulsed Secondary Air System (PAIR) is for emissions only.  You should get rid of it.  If your state (AZ comes to mind...) checks emissions for motorcycles, you probably will fail with a lunchbox, so I'd block it off.
Title: Re: pulse air system (pairs) ...??
Post by: GSF500 on January 15, 2013, 01:42:31 PM
THANKS AGAIN :woohoo:
Title: Re: pulse air system (pairs) ...??
Post by: weedahoe on January 15, 2013, 10:03:27 PM
My PAIRS were removed long ago too. Less crap to worry about later on
Text only | Text with Images