GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: frylockjim on June 03, 2013, 04:39:13 PM

Title: Learn from my mistake as a newbie!
Post by: frylockjim on June 03, 2013, 04:39:13 PM
So i decided to pull my carbs out a couple days ago to check the floats. When i was putting the bike back together i was having trouble getting the gas lines back on the petcock, and i didnt have any gas lying around to use as lube (which is what i usually use to get the lines back on). My dumb self decided to use WD-40 to lube up the lines on the inside. :cookoo: Then, when i started her up this morning, i noticed that it was bogging alot in the higher rpms and then shut off. Confused, i started thinking of what it could be. After checking the spark plugs for a spark and checking the compression it finally dawned on me that its the carbs! When i pulled the carbs out, i saw this long jelly thing clogging up my main jet. My best guess is that it was the WD-40 i used to get the gas lines back on to the petcock. Now its running perfect again, and i will NEVER use WD-40 on the gas lines again  :cheers:  :thumb:
Title: Re: Learn from my mistake as a newbie!
Post by: fetor56 on June 03, 2013, 07:09:44 PM
"NEVER use WD-40 on the gas lines again"...........good to hear.
Title: Re: Learn from my mistake as a newbie!
Post by: weedahoe on June 03, 2013, 09:12:28 PM
I have used WD40 to lube the nipples on the tank petcock to get the lines on and havent had issues but I dont use a lot and never inside the fuel lines. Either way, glad you got her running
Title: Re: Learn from my mistake as a newbie!
Post by: frylockjim on June 03, 2013, 10:28:01 PM
Yeah after a couple of smokes and plenty of cursing she started right up.  :D but i did miss class because of it...
Title: Re: Learn from my mistake as a newbie!
Post by: Janx101 on June 03, 2013, 11:30:22 PM
ummm ... errrr.... Jimbo .. working on fuel lines ...
Quote from: frylockjim on June 03, 2013, 10:28:01 PM
Yeah after a couple of smokes and plenty of cursing she started right up.  :D but i did miss class because of it...

.... you planning on being an astronaut or what??  ;)

(http://www.theaterhopper.com/images/explosion.jpg)
Title: Re: Learn from my mistake as a newbie!
Post by: frylockjim on June 05, 2013, 01:33:01 AM
Quote from: Janx101 on June 03, 2013, 11:30:22 PM
ummm ... errrr.... Jimbo .. working on fuel lines ...
Quote from: frylockjim on June 03, 2013, 10:28:01 PM
Yeah after a couple of smokes and plenty of cursing she started right up.  :D but i did miss class because of it...

.... you planning on being an astronaut or what??  ;)

(http://www.theaterhopper.com/images/explosion.jpg)

Naw im going to school to be a mechanic. It was actually the GS500 and this website that inspired me to start my career as an automotive technician. Couldnt afford to take it to the shop for every problem/upgrade i wanted/needed to do on my bike so i came on here to learn how to work on my bike and i immediately loved it! You can call it my GS500 technician career love story if you wish  :D
Title: Re: Learn from my mistake as a newbie!
Post by: cbrfxr67 on June 05, 2013, 08:43:30 AM
Nice write up,....good luck with your training,.....got autels for cheap  :whisper: lol
Title: Re: Learn from my mistake as a newbie!
Post by: frylockjim on June 07, 2013, 03:59:55 PM
Quote from: cbrfxr67 on June 05, 2013, 08:43:30 AM
Nice write up,....good luck with your training,.....got autels for cheap  :whisper: lol

haha thanks. so far im doing pretty good but every now and then i still need to search the forums