so im slowly doing a few things to make my 08 naked F model "mine"
and i have a few questions for anyone who can help me out!
first off, the stainless steel cover on the exhaust, its rivetted on? can i take that off? what will i find underneath? i dont care for the shiny stainless steel.
im hoping to poke holes in it or cut out the inner-tube a bit near the end too to make it sound better, but ive seen other posts about that
also, i think i want to remove the rear tail fairing, but what can i do with the signal control box and the stator or whatevers there? should i move them under the seat somehow, or leave them there?
and what about the tail light? can i move that somehow so it doesnt stick out so far behind the seat?
bare with me, im new to all this, i appreciate any advice!
Quote from: matttkeller on June 20, 2013, 09:37:12 PM
so im slowly doing a few things to make my 08 naked F model "mine"
and i have a few questions for anyone who can help me out!
first off, the stainless steel cover on the exhaust, its rivetted on? can i take that off? what will i find underneath? i dont care for the shiny stainless steel.
im hoping to poke holes in it or cut out the inner-tube a bit near the end too to make it sound better, but ive seen other posts about that
also, i think i want to remove the rear tail fairing, but what can i do with the signal control box and the stator or whatevers there? should i move them under the seat somehow, or leave them there?
and what about the tail light? can i move that somehow so it doesnt stick out so far behind the seat?
bare with me, im new to all this, i appreciate any advice!
SS Cover is a heat shield. If you dont like it then paint it with HT Paint. I WOULD NOT recommend removing it as its there for a reason AND its ugly underneath anyway. :thumb:
ahah thanks i was wondering that! ill make sure i dont then!
whats HT paint if you dont mind me asking? something that deals with the heat better im assuming? can i get it at like any hardware store?
i might look into a new exhaust anyway, but i dont know of any decently priced (under $350) ones that look good, i just cant stand the stainless steel and chrome stuff ahaha
Correct, by HT he means high temp. You can by a brand "VHT" at most auto parts stores and it is made for headers and exh
Painted the heat shield on my exhaust flat black with high temp grill paint. Worked like a charm and made the scratched up shield look pretty good.
Quote from: weedahoe on June 23, 2013, 07:20:34 PM
Correct, by HT he means high temp. You can by a brand "VHT" at most auto parts stores and it is made for headers and exh
Thanks weeds, I missed the last question
Just posted the same question about wiring under fairings.
Matt, looks like we are on a similar quest.
thanks a ton guys, ill definitely get on that!
and Fable, if you come up with anything let me know! ill take a look again tomorrow and see if i can just leave them there without it looking too messy, but i feel like the fender underneath will still look funny
i saw a post on here were someone took everything off the back and it looked goood, but i cant find the post!
so its off, debating what to do with the light, it sticks out too much, and i think i want to remove the fender too, i saw a few pictures and it looks good!