Like some other persons, I have a lot of parts Ive been hording. What Im listing is what I can think of off the top of my head.
These prices do NOT reflect shipping
Small stuff
(1) front F headlight cowl - $50
(2) headlight stay - $20
(3) "F" oil pans - $10 ea - went to the trash
(1) at least one headlight - $75 ea
(1) set of rear fairings - $100 set
(1) set of .85 sonic springs - make decent offer
(1) set of non bent forks - $100 - sold
(1) set of new fork and dust seals - $25 - sold
(1) Spy M5000 2 way LED remote alarm (shock and motion sensor) - $90 - sold
At least two sets of engine sides (left and right) - make offer - went to the trash
At least two crank magnetos - make offer - went to the trash
(1) T-Rex frame sliders - 80
I will sell my HID Projector headlight with the xB Plama halo for $200 - sold
89 clip ons with new bars - $100 and your non bent OEM bars - sold
Bandit 1200 rear hugger - $100
New billet right engine cover and fork brace by Chuck81 - $40 each - sold
GSXR 1100 rear sets and adapter plates - $150 - sold
Katana dual front calipers. I THINK I have brand new in the box pads for these - $75
VERY NICE GS500F gauges with ODO reading of 1011 miles. All indicator caps are there - $150 - sold
CDI - $50
Now the big stuff
NEW chromed Katana front and rear rims with NEW Metzler SPortec M3s (160/120). The rear will come with the sprocket and hub. The front will twin rotors. I have $300 in the OEM rims and rotors. I have another $600 in chrome and another $250 in the tires. Looking for $800 for everything and for another $200 I will throw in the rim lights and the hardware. That hardware costs another 500-600. See www.RawDesigns.com
CUSTOM exhaust. Dual Yoshimura setup. I would sell it all for $500 shipped. Truth be told, the two Yoshi cans are for a Hayabusa setup. They are $800. I had to buy two Hayabusa mid-pipes so I could cut the flanges off the ends so I could mount the Yoshi cans ($75). I paid another $200 to get custom pipes cut, bent and welded. I also have the insets to go in them to make them more quiet if you want them
- sold
COMPLETE set of custom painted fairings. Front cowl, two engine side fairings, two rear tail fairings and center piece. These were 2K primered, wet sanded, silver base, triple flake intercoat, wet sanded, polished, clear coated, wet sanded and polished again. NO cracks. ZERO damage. PLEASE NOTE - the front headlight cowl had ABS plastic welded (not epoxied) over the holes for the OEM turn stalks, filled with filler, smoothed down and painted. Think of it as shaving door handles. The matching fuel tank comes with the set. A LOT of work went into these fairings and I have gotten a LOT of complements on them. At $800 I am GIVING them away. The paint and labor alone is worth more than that. The tank has a brand new petcock and chrome cover on the fuel cap
There are plenty of pics here. There is no way I can post pics of everything in this thread but everything I have done is in this link and separated by folders
http://sdrv.ms/MWXY0d
What are the springs worth? I dont have any idea what to offer, I just need some for sure!
Springs new from their site are $80.
So how-about $60 shipped?
Headlights cowl to 98823
I would love to take those frame sliders off your hands if you could bump down the price just a tad :)
Thanks,
Shane :thumb:
I was thinking like 70 bucks? Also maybe set up a package type deal if I buy the billet right engine cover and fork brace??? Do you still have gear shift indicator just wondering? so if you have all that a bundle price would be great!
Quote from: spcassell2125 on July 06, 2013, 06:45:19 AM
I was thinking like 70 bucks? Also maybe set up a package type deal if I buy the billet right engine cover and fork brace??? Do you still have gear shift indicator just wondering? so if you have all that a bundle price would be great!
for you........
70 for the sliders
80 for the fork brace and engine cover
30 for the gear indicator
20 to ship everything
Do you still have the Sonic Springs?
Quote from: amkluttz on July 08, 2013, 09:43:24 AM
Do you still have the Sonic Springs?
Still for sale
Is the alarm brand new and unused? its 99bucks online
The alarm was install on the bike back in May. However, it has been sold.
The digital gear shifter is sold.
The hid projector, headlight, fork/dust seals and dual yoshi exh have a deposit on them.
Rims and tires are going on eBay.
Quote from: weedahoe on July 08, 2013, 10:24:44 AM
Quote from: amkluttz on July 08, 2013, 09:43:24 AM
Do you still have the Sonic Springs?
Still for sale
Would you take $50 shipped? If so tell me where to send the cash.
Would I need anything other than the springs to do the swap (spacers or anything else)?
Quote from: amkluttz on July 08, 2013, 06:39:50 PM
Quote from: weedahoe on July 08, 2013, 10:24:44 AM
Quote from: amkluttz on July 08, 2013, 09:43:24 AM
Do you still have the Sonic Springs?
Still for sale
Would you take $50 shipped? If so tell me where to send the cash.
Would I need anything other than the springs to do the swap (spacers or anything else)?
Springs new from their site are $80.
So how-about $60 shipped?
Spacers are in the box with the springs
Quote from: weedahoe on July 08, 2013, 08:07:05 PM
Quote from: amkluttz on July 08, 2013, 06:39:50 PM
Quote from: weedahoe on July 08, 2013, 10:24:44 AM
Quote from: amkluttz on July 08, 2013, 09:43:24 AM
Do you still have the Sonic Springs?
Still for sale
Would you take $50 shipped? If so tell me where to send the cash.
Would I need anything other than the springs to do the swap (spacers or anything else)?
Springs new from their site are $80.
So how-about $60 shipped?
Spacers are in the box with the springs
Sorry man, haven't been around a computer for the last two days. Work has me super busy. If you still have the springs I think I would like to get them. How would you like your money? I'm certified on Paypal.
-Andy
Paypal is good. I will shoot you a PM
Sonic springs and alarm are sold
Forks are sold
updated the first thread
Freshly chrome Katana rims with new Metzler Sportec M3 tires (160/120) are on ebay for $500
http://www.ebay.com/itm/161062651328
Man, those rear sets are a piece of art. Did you have to alter the break side cylinder location to install?
Yes, but everything is included for a clean install. It is the rear sets, adapter plates, new pegs, brake fluid reservoir, master cylinder and brake switch
The left side shift linkage rod is already adjusted for a perfect alignment and makes gear changing so much more easier and faster. Everything has been freshly painted a metallic silver base coat, clear coated, wet sanded and polished.
Yes, but everything is included for a clean install. It is the rear sets, adapter plates, new pegs, brake fluid reservoir, master cylinder and brake switch
The left side shift linkage rod is already adjusted for a perfect alignment and makes gear changing so much more easier and faster. Everything has been freshly painted a metallic silver base coat, clear coated, wet sanded and polished.
Do you still have the Clip ons?
I do still have them
Would you be willing to ship them to Canada? If so, how much shipped to P0T 2P0? And do you accept PayPal?
Only problem, is I need your bars to go on my bike
I See. Mine are bent so you won't want them. I see alot of different clipons online, but none of them come with the top tripple clamp to mount them. I guess one could mount them under the clamp, but that would be crazy low. Maybe I will just check out a set of clubmans then, if I can't find the whole assembly.
If you wanted to do the $100 plus $25 for new bars plus shipping I would do the deal.
As for clip ons, you can lower the top clamps and put them on top rather than under the clamp
Looking for exhaust header bolt
Quote from: HPP8140 on July 16, 2013, 06:47:02 AM
Looking for exhaust header bolt
Take one out of your bike, go to the hardware store, find a match and purchase 2
If you still have the GSXR 1100 rearsets, I'd be interested. I already have adapter plates, though...
Quote from: JAS6377 on July 16, 2013, 11:18:40 PM
If you still have the GSXR 1100 rearsets, I'd be interested. I already have adapter plates, though...
$110 shipped for the rear sets, custom linkage rod, pegs, master cylinder
Quote from: weedahoe on July 16, 2013, 06:49:38 AM
Quote from: HPP8140 on July 16, 2013, 06:47:02 AM
Looking for exhaust header bolt
Take one out of your bike, go to the hardware store, find a match and purchase 2
didn't know any bolt could stand the heat
Quote from: HPP8140 on July 17, 2013, 06:36:59 AM
Quote from: weedahoe on July 16, 2013, 06:49:38 AM
Quote from: HPP8140 on July 16, 2013, 06:47:02 AM
Looking for exhaust header bolt
Take one out of your bike, go to the hardware store, find a match and purchase 2
didn't know any bolt could stand the heat
Just use some anti sieze compound
if that tail fairing will fit a 2009 i could really use them as long as nothing is broken. my tail fairing has zip ties on it atm. shipping 14606
Quote from: Zmerica19 on July 17, 2013, 02:07:15 PM
if that tail fairing will fit a 2009 i could really use them as long as nothing is broken. my tail fairing has zip ties on it atm. shipping 14606
One set is on hold as it has a deposit. The other set has one small piece at the top missing where one of the bolts go through under the seat. It does not affect its mounting or security though.
If you are interested, they are yours. Already boxed and ready to go.
Updated the first post of whats left.
you still got those frame sliders?
Quote from: Gorilla on July 29, 2013, 12:58:15 PM
you still got those frame sliders?
Sitting right here in a box ready to head your way :)
When you say "engine sides" are you talking about crankcase covers? I'm looking for a magneto cover (Left side cover) in the grey/aluminum color. Mine is pretty scarred up from the previous owner. Its number 14 on the schematic in this link http://www.bikebandit.com/1997-suzuki-gs500e-crankcase-cover/o/m22235sch234732 (http://www.bikebandit.com/1997-suzuki-gs500e-crankcase-cover/o/m22235sch234732).
Undamaged would be great. Thanks.
I have one and will post a pic for you later this morning since its 2:23 am now ;)
Do you still have the 89' clip ons?
I do have them
Top clamp, two bolts to hold top clamp, two bar mounts and their bolts, two new bars and used end weights or
For additional $30 I will leave the new grips and bar weights on the bars
(https://veqikq.tuk.livefilestore.com/y2pkn0tW0VulA5-Tg1GUFrCQeREUPRTpIdN0fNIOfVfw1meAkyjQ7j51ErFIR_0G49P4-Wjj2GuvNtsDxElNJJYxiE6E1SIo-7SoAvIcXVIl5A/IMG_20130330_210216_318.jpg?psid=1)
Quote from: weedahoe on July 31, 2013, 11:23:40 PM
I have one and will post a pic for you later this morning since its 2:23 am now ;)
Thanks, I'll keep an eye on this thread for the pic.
Quote from: DrtRydr23 on August 01, 2013, 04:26:27 PM
Quote from: weedahoe on July 31, 2013, 11:23:40 PM
I have one and will post a pic for you later this morning since its 2:23 am now ;)
Thanks, I'll keep an eye on this thread for the pic.
Here you go. I do have a brand new billet cover for the one in the first pic also
(https://kb93ba.blu.livefilestore.com/y2pYkwUhi482bDt7uwLfxThX7I0eYMrnFZ4pLEZjJkdpUA5REh7Ll5-42132NLOoic_5s2riKYO5yKCooS6tPIq_NtaiVn8FdxM12isbbeenJQ/20130802_000011.jpg?psid=1)
(https://kb93ba.blu.livefilestore.com/y2p9b_0rQW539gJvMYjNHH2SEO_nP2azqXy0dBvJJmaab-_HJxUipn_cD8NGNP9pPXUqr9D7K0SVqRMWPq97b7M9B8Id03ssFHcM8fYzU2x64o/20130802_000033.jpg?psid=1)
Is that projector retrofit an F model headlight assembly? If so, do you have pics?
Edit: I feel silly now. I didn't see the strike through on my phone... Oh well.
Would you possibly be able to guide me in the right direction for my own projector retrofit?
Yeah, it's sold. I can build you one if you want. As for how to do one yourself, shoot me a PM
I see in the pics you have (old pegs). Do these bolt on the same as the original pegs. How much for them?
I assume these are the front pegs.
Sorry. I put those back on the bike once I sold the GSXR rearsets
Quote from: bikeneil on September 02, 2013, 06:30:31 PM
I see in the pics you have (old pegs). Do these bolt on the same as the original pegs. How much for them?
I assume these are the front pegs.
I have my old stock pegs and whole rearset for the gs if you want them
Weedahoe - what about the chrome pegs in the pic?
spcassell2125 - how much for the stock front pegs?
Those were left on the GSXR reassess. Sorry
Quote from: spcassell2125 on September 03, 2013, 05:59:11 AM
I have my old stock pegs and whole rearset for the gs if you want them
spcassell2125 - how much for the stock front pegs?
Quote from: weedahoe on September 02, 2013, 05:23:31 PM
Yeah, it's sold. I can build you one if you want. As for how to do one yourself, shoot me a PM
PM sent. Thanks!
Pic of the covers still for sale. I updated the first post and threw some things away because no one wanted them :(
(https://9go51g.bn1.livefilestore.com/y2polvNVW3OGDcrkSyh1L9i-QaHrU6ADf8TIv2iYKurTjWYgOG066ZHcWJUxSBIy3NuxtF6nNPOhExKqgnxfrF4dZD3NTnSvw7slt8WQ2DvY-oSCROozxEx6s8W3Ip3aCJG/IMG_20130204_212025_541.jpg?psid=1)
OK. We'll take the covers for the Seattle Bike Builds.
Stalking all my threads I see
Ill shoot you a PM
Quote from: adidasguy on September 04, 2013, 04:28:36 PM
OK. We'll take the covers for the Seattle Bike Builds.
Dude. You're in like every other parts post that weedahoe has made lol.
Billet covers and gauges are sold
Quote from: JAS6377 on September 04, 2013, 06:26:54 PM
Quote from: adidasguy on September 04, 2013, 04:28:36 PM
OK. We'll take the covers for the Seattle Bike Builds.
Dude. You're in like every other parts post that weedahoe has made lol.
Yeah, he knows I keep a lot of good chit ;)