GStwin.com GS500 Message Forum

Main Area => Projects / Builds, Racing and Tech => Topic started by: jandbj on July 16, 2013, 12:16:56 PM

Title: Added hardbags to my GS500F
Post by: jandbj on July 16, 2013, 12:16:56 PM
Inspired by the pics online of Pelican 1430 cases added to a Yamaha R1 "power commuter"
http://www.r1-forum.com/forums/showthread.php?t=237334 (http://www.r1-forum.com/forums/showthread.php?t=237334)

Got the hoops the cases are attached to from www.dirtracks.com.  Added a pair of Pelican 1430 cases and about a week of evenings staring at the parts before busting out the MIG welder and attaching brackets to the factory tied own bar thingys under the seat on each side.  A stroke of genius hit one night and I added a diagonal brace on each down to the rear peg mounts.   Brought it to a buddy that is a master welder for finish welding and voila!

(http://i812.photobucket.com/albums/zz45/jandbj/20130707_104910_zps5bc94231.jpg)
(http://i812.photobucket.com/albums/zz45/jandbj/20130707_223934_zps8adfc7ea.jpg)
(http://i812.photobucket.com/albums/zz45/jandbj/20130707_105045_zpsd2e28dc8.jpg)

Still need to shorten the rear taillight stalks and add some reflective tape, but they are on tight & don't wobble or wiggle, I see no negative effects to handling and only melted a little plastic while tacking it together.  ;).  Might have to paint the bike the same shade of green over the winter too.  :D
Title: Re: Added hardbags to my GS500F
Post by: jandbj on July 16, 2013, 12:41:05 PM
 :whisper:Found the in progress pics!   

Started by attaching the bags to the racks, the welded 18" rods between the racks to hold them in position while I started tacking.  Set those over the tire and used a bungee cord & the piece of wood through the handles to set position parallel to seat...
(http://i812.photobucket.com/albums/zz45/jandbj/20130628_130947_zpsbf78f275.jpg)
Early pics...
(http://i812.photobucket.com/albums/zz45/jandbj/20130629_110814_zps29d30e23.jpg)
(http://i812.photobucket.com/albums/zz45/jandbj/20130629_110804_zps24c7fe3e.jpg)
(http://i812.photobucket.com/albums/zz45/jandbj/20130629_111547_zps7ba5cc43.jpg)

Just a bit of trimming left before going off to finish welding...  Removed the temporary rear spacer too.
(http://i812.photobucket.com/albums/zz45/jandbj/20130629_180153_zps00b0dbd2.jpg)
Title: Re: Added hardbags to my GS500F
Post by: Slack on July 16, 2013, 02:16:39 PM
Very cool.   Looks good and clean.
Title: Re: Added hardbags to my GS500F
Post by: Janx101 on July 16, 2013, 02:21:38 PM
 :thumb: nice!!!