GStwin.com GS500 Message Forum

Main Area => General GS500 Discussion => Topic started by: thebigtuna on November 25, 2013, 11:10:00 PM

Title: Fork seal question
Post by: thebigtuna on November 25, 2013, 11:10:00 PM
I noticed today that tiny amounts of fork oil is leaking under the dust cap on one of the forks and has run down onto the ground. Also when I compress the fork there is oil residue on the fork. So after looking around I'm pretty sure I need to replace the seal and have seen some of the posts and videos on YouTube. My question is where can I find fork seals. I have an 07 gs500f and on bike bandit they say it doesn't fit. Is that true? I don't have a suzuki dealer around me to go to. Thanks for the help
Title: Re: Fork seal question
Post by: Joolstacho on November 26, 2013, 02:15:27 AM
Fork seals are easy to get. Just one thing... be wary of Pyramid Parts oil seals. I've fitted a few PP sets recently which were absolute crap!
Title: Re: Fork seal question
Post by: thebigtuna on November 26, 2013, 09:01:46 AM
So like this http://www.bikebandit.com/bikemaster-o-e-fork-oil-seals would work? Or this since I will need dust seals on both forks http://www.bikebandit.com/msr-fork-and-dust-seal-kit.
Title: Re: Fork seal question
Post by: slipperymongoose on November 26, 2013, 03:02:28 PM
All fork seals for the gs are the same as far as I can remember
Title: Re: Fork seal question
Post by: Janx101 on November 26, 2013, 03:29:15 PM
unless your wiper/dust bits are cracked or really poor condition you dont really need to replace them .. just give them a once over with a clean cloth ..

I did replace my wipers on an 06F 'just to be sure' .. but i did have some really minor pitting/rust spots on the forks as well..

I tried Pyramid seals also to start with ... they looked different from the OEM ones ? ... and started leaking within a week of installation ..

some users here have had no problem though..

if you have the few extra $$ i would still go for the OEM type seals  :thumb:
Title: Re: Fork seal question
Post by: kyled25 on November 26, 2013, 04:05:32 PM
Quote from: thebigtuna on November 25, 2013, 11:10:00 PM
I have an 07 gs500f and on bike bandit they say it doesn't fit. Is that true? I don't have a suzuki dealer around me to go to. 

http://www.bikebandit.com/2007-suzuki-gs500f/o/m16095#sch649430 (http://www.bikebandit.com/2007-suzuki-gs500f/o/m16095#sch649430) Part number 7 on the list.
Title: Re: Fork seal question
Post by: thebigtuna on November 27, 2013, 02:08:56 PM
Thanks for all the help. Didn't figure the dust caps would be $40 though. I will have to replace both probably there are little cracks all along the top of them.
Title: Re: Fork seal question
Post by: thebigtuna on November 27, 2013, 02:11:19 PM
Also just to be sure with that's link they don't come in sets right? When I click quantity 2 on the oem parts I'm actually getting 2 and not 4 correct?
Title: Re: Fork seal question
Post by: kyled25 on November 27, 2013, 03:04:16 PM
correct; the OEM ones are sold individually